FAQ - Frequently Asked Questions
- Products Search > Materials Testing & Inspection
Keyword Search
Materials Testing & Inspection
Frequently Referenced FAQ
FAQ within [ Materials Testing & Inspection ]
-
As for Items as follows, you can check the test machine as to whether they have troubles. If you think that they might have troubles, please use this functio... Show Detail
- No：7542
- Date of Issue：2021/12/03 09:02
- Category： Universal Testing Machine(UH)
-
(UH) Checking of the emergency stop equipment
Before using this machine, please check the emergency stop equipment. If this machine didn’t work in the undermentioned check, contact a Shimadzu sales or se... Show Detail
- No：7541
- Date of Issue：2021/12/03 09:02
- Category： Universal Testing Machine(UH)
-
(UH) Adjusting the Zero Point of the Test Force (Auto Zero)
The zero adjustment of the test force is executed automatically by a touch-panel operation (Auto Zero function). CAUTION: • The zero adjustment of... Show Detail
- No：7540
- Date of Issue：2021/12/02 16:22
- Category： Universal Testing Machine(UH)
-
(UH) Electronic Calibration (E-CAL)
The electronic calibration (E-CAL) is required once per day before the daily startup of the testingmachine. Even so, this calibration must be done immediatel... Show Detail
- No：7539
- Date of Issue：2021/12/02 16:22
- Category： Universal Testing Machine(UH)
-
(UH) Mounting the platens for Compression Tests
CAUTION:When attaching the compression platen, be carefull not to have your fingerscaught. Be carefull not to fall the compression platen. Compression pl... Show Detail
- No：7538
- Date of Issue：2021/12/02 16:09
- Category： Universal Testing Machine(UH)
- Brached FAQ
-
(UH) Using the Grip jaws for Tensile Tests
CAUTION:The grip jaws have sharp edges to allow grasping of the specimen. When handling the grip jaws, be careful not to cut your fingers or hand. ... Show Detail
- No：7537
- Date of Issue：2021/12/02 15:53
- Category： Universal Testing Machine(UH)
- Brached FAQ
-
1. Levelness inspection of the load frame 1)Place a spirit level near the center of the table top and measure the levelness of the table in all dire... Show Detail
- No：7545
- Date of Issue：2021/12/02 15:17
- Category： Universal Testing Machine(UH)
- Brached FAQ
-
1. Apply grease to the screw rods. Be sure to completely remove the old grease before applynew grease. (Monthly) 2. Apply machine oil or spindle oil to ... Show Detail
- No：7544
- Date of Issue：2021/12/02 15:17
- Category： Universal Testing Machine(UH)
- Brached FAQ
-
(UH) Repositioning the Upper Crosshead
WARNING:Be sure to install the lower fixture so that it is seated correctly in the set ring. The upper fixture may come off during tests if the lower f... Show Detail
- No：7536
- Date of Issue：2021/12/02 15:17
- Category： Universal Testing Machine(UH)
- Brached FAQ
-
(UH) Setting up the touch panel
Before operating the testing machine, you need to perform the initial setting of the LCD display. The touch panel must be configured so that the keys displa... Show Detail
- No：7535
- Date of Issue：2021/12/02 13:38
- Category： Universal Testing Machine(UH)
151-160 of Total 211