Frequently Asked Questions
- Products Search > Materials Testing & Inspection > Hardness Tester > Micro Hardness Tester(HMV)
Keyword Search
Frequently Referenced FAQ
FAQ within [ Micro Hardness Tester(HMV) ]
-
(HMV) If the indentation has an abnormal shape
If the shape of the indentation is abnormal as shown in below,the indenter attachment is malfunctioning or is improperly adjusted. In this case, contact a S... Show Detail
- No:7497
- Displayed Date:2021/12/06 11:48
-
(HMV) If nothing is displayed with the power ON
Turn the power OFF and then ON. Then recheck the display. If the problem persists,repairs will be necessary, so contact a Shimadzu sales or service repres... Show Detail
- No:7496
- Displayed Date:2021/12/06 11:48
-
(HMV) If the READY lamp is not lit with the power ON
Turn the power OFF and then ON. Then recheck the display. If the problem persists, repairs will be necessary, so contact a Shimadzu sales or service repre... Show Detail
- No:7495
- Displayed Date:2021/12/06 11:48
-
(HMV) LCD Touch Panel Correction
It will not be possible to enter values if the position where your fingers press on the touchpanel cannot be identified properly. If you press an entry icon... Show Detail
- No:7491
- Displayed Date:2021/12/06 11:48
-
(HMV) Judgment Value Settings for Automatic Detections
This configures the pass/fail criteria for the results of automatic indentation readings. 1. On the main menu, click [File] - [Maintenance] to display t... Show Detail
- No:7488
- Displayed Date:2021/12/06 11:48
-
(HMV) Adjusting the Brightness and Contrast
This adjusts the quality of the image imported to the PC. Perform this adjustment in the following cases: • The tester's illumination lamp has been replace... Show Detail
- No:7485
- Displayed Date:2021/12/06 11:48
-
This adjustment determines the position of the cross-hair displayed in the image window during testing. In Automatic Detection mode, the search for indentati... Show Detail
- No:7482
- Displayed Date:2021/12/06 11:48
-
(HMV) Camera Attachment Position and Focusing Adjustments
Before performing magnification and image center adjustments, adjust the camera's attachment position until the image observed through the tester's eyepiece ... Show Detail
- No:7481
- Displayed Date:2021/12/06 11:48
-
(HMV) Replacing and Adjusting the Objective Lens
Adjust the magnification as indicated below if the optical head has been removed, if theobjective lens has been replaced, or if the magnification is unsuitab... Show Detail
- No:7478
- Displayed Date:2021/12/06 11:21
- Brached FAQ
-
(HMV) The ready lamp and the running lamp blink
Replace the battery on the CPU board. Contact a Shimadzu sales or service representative. Show Detail
- No:7506
- Displayed Date:2021/12/06 10:05
1-10 of Total 25