FAQ - Frequently Asked Questions
- Products Search > Materials Testing & Inspection > Servopulser
Keyword Search
Servopulser
Frequently Referenced FAQ
FAQ within [ Servopulser ]
-
1.With the Hydraulic Power Supply stopped, screw the "Screw Rod" into the center of the actuator piston tip. 2.After inserting "Ring Wedge" into "Screw Rod"... Show Detail
- No:7600
- Date of Issue:2021/12/08 15:45
- Category: EHF Series
- Brached FAQ
-
1.After starting the Hydraulic Power Supply, press the LOAD key on the front of the control unit. 2.A confirmation screen is displayed on the LCD panel. Pre... Show Detail
- No:7598
- Date of Issue:2021/12/08 09:27
- Category: EHF Series
- Brached FAQ
-
To ensure proper operation of the equipment, check the following before using it. 1.Check that the power cables of the control unit, Hydraulic Power Supply,... Show Detail
- No:7597
- Date of Issue:2021/12/08 09:27
- Category: EHF Series
- Brached FAQ
-
(EHF) The set displacement amplitude does not appear
Automatic control during testing with Type 1 calculates with the supply pressure set in the detailed supply pressure. If the supply pressure of the hydraulic... Show Detail
- No:7644
- Date of Issue:2021/12/07 10:15
- Category: Windows Software for 4830
-
(EHF) The set maximum test force cannot be loaded / The s...
The maximum testable condition is a reference value. We do not guarantee the actual test. Depending on the state of the device, the value may not be. If the ... Show Detail
- No:7643
- Date of Issue:2021/12/07 10:15
- Category: Windows Software for 4830
-
(EHF) The display does not change when the Phase unit set...
Changing the 'Phase unit' setting is only effective for an optionaltest. Show Detail
- No:7642
- Date of Issue:2021/12/07 10:15
- Category: Windows Software for 4830
-
(EHF) The display does not change when the language setti...
The software must be restarted after the language setting ischanged. The change will take effect after the software isrestarted. Show Detail
- No:7641
- Date of Issue:2021/12/07 10:15
- Category: Windows Software for 4830
-
(EHF) A name cannot be set for a TD
A name cannot be set for a TD that is not connected. Show Detail
- No:7640
- Date of Issue:2021/12/07 10:15
- Category: Windows Software for 4830
-
(EHF) Numerical display is abnormal
Do not change the language in the regional and languageoptions of your operating system, even if the operating systemis compatible. If the display and format... Show Detail
- No:7638
- Date of Issue:2021/12/07 10:15
- Last Updated:2022/01/14 14:13
- Category: Windows Software for 4830
-
(EHF) I cannot open a result file
• A result file acquired using a differ ent controller cannot be opened. • A result file cannot be opened if the computer is not connectedto a controller. Show Detail
- No:7637
- Date of Issue:2021/12/07 10:15
- Category: Windows Software for 4830
1-10 of Total 57