FAQ - Frequently Asked Questions
- Products Search > Materials Testing & Inspection
Keyword Search
Materials Testing & Inspection
Frequently Referenced FAQ
FAQ within [ Materials Testing & Inspection ]
-
(DUH) Starting X-Y stage program
CAUTION:When starting program, the X-Y stage returns to an original position. So, lower the stage soas not to damage an indenter before starting program. ... Show Detail
- No：7527
- Date of Issue：2021/12/06 11:48
- Category： Dynamic Ultra-micro Hardness Tester(DUH)
-
Cause1: Alarm occurs. Measures1: Turn on the motor control box. Connect the emergency stop SW. The emergency stop SW is turnedoff. Cause2:The mot... Show Detail
- No：7525
- Date of Issue：2021/12/06 11:48
- Category： Dynamic Ultra-micro Hardness Tester(DUH)
-
1. “Slide sample stage to load side” is displayed at the start of test • Causes1:The stage has not been moved to under the indenter. Before starting ... Show Detail
- No：7524
- Date of Issue：2021/12/06 11:48
- Category： Dynamic Ultra-micro Hardness Tester(DUH)
-
(DUH) Indentation shape is abnormal
If the Indentation shape is abnormal as shown in below, the indenter mounting part may be defective. Replace the defective part with a new one. For replaceme... Show Detail
- No：7523
- Date of Issue：2021/12/06 11:48
- Category： Dynamic Ultra-micro Hardness Tester(DUH)
-
(HMV) If the indentation has an abnormal shape
If the shape of the indentation is abnormal as shown in below,the indenter attachment is malfunctioning or is improperly adjusted. In this case, contact a S... Show Detail
- No：7497
- Date of Issue：2021/12/06 11:48
- Category： Micro Hardness Tester(HMV)
-
(HMV) If nothing is displayed with the power ON
Turn the power OFF and then ON. Then recheck the display. If the problem persists,repairs will be necessary, so contact a Shimadzu sales or service repres... Show Detail
- No：7496
- Date of Issue：2021/12/06 11:48
- Category： Micro Hardness Tester(HMV)
-
(HMV) If the READY lamp is not lit with the power ON
Turn the power OFF and then ON. Then recheck the display. If the problem persists, repairs will be necessary, so contact a Shimadzu sales or service repre... Show Detail
- No：7495
- Date of Issue：2021/12/06 11:48
- Category： Micro Hardness Tester(HMV)
-
(HMV) LCD Touch Panel Correction
It will not be possible to enter values if the position where your fingers press on the touchpanel cannot be identified properly. If you press an entry icon... Show Detail
- No：7491
- Date of Issue：2021/12/06 11:48
- Category： Micro Hardness Tester(HMV)
-
(HMV) Judgment Value Settings for Automatic Detections
This configures the pass/fail criteria for the results of automatic indentation readings. 1. On the main menu, click [File] - [Maintenance] to display t... Show Detail
- No：7488
- Date of Issue：2021/12/06 11:48
- Category： Micro Hardness Tester(HMV)
-
(HMV) Adjusting the Brightness and Contrast
This adjusts the quality of the image imported to the PC. Perform this adjustment in the following cases: • The tester's illumination lamp has been replace... Show Detail
- No：7485
- Date of Issue：2021/12/06 11:48
- Category： Micro Hardness Tester(HMV)
111-120 of Total 211