FAQ - Frequently Asked Questions
- Products Search > Materials Testing & Inspection
Keyword Search
Materials Testing & Inspection
Frequently Referenced FAQ
FAQ within [ Materials Testing & Inspection ]
-
(DUH) Starting X-Y stage program
CAUTION:When starting program, the X-Y stage returns to an original position. So, lower the stage soas not to damage an indenter before starting program. ... Show Detail
- No：7527
- Date of Issue：2021/12/06 11:48
- Category： Dynamic Ultra-micro Hardness Tester(DUH)
-
In the event of a problem such as abnormal sound or a burning smell from the loading frame, actuator,control unit, or Hydraulic Power Supply, take the follow... Show Detail
- No：7583
- Date of Issue：2021/12/07 10:15
- Category： EHF Series
-
(EHF) Maintaining the EHF-Series
• Column Wipe clean with a soft dry cloth or a soft cloth dampened with a mild detergent. •Actuator piston Wipe clean with a soft dry cloth or a sof... Show Detail
- No：7584
- Date of Issue：2021/12/07 10:15
- Category： EHF Series
-
This product uses a hexagon socket head cap screw of Strength Classification 12.9 (10.9 for M24 and above) (except for some parts). Each bolt must be properl... Show Detail
- No：7585
- Date of Issue：2021/12/07 10:15
- Category： EHF Series
-
(EHF) Checking the crosshead clamp
1) Check that the crosshead drop prevention stopper is firmly fixed by pushing against the upper surface of the cylinder of the lifting jack. 2) Start the H... Show Detail
- No：7586
- Date of Issue：2021/12/07 10:15
- Category： EHF Series
-
(EHF) Charging the accumulator with nitrogen gas
The accumulator is filled with nitrogen gas by our company Field Engineer. However, if you purchase the gas charging assembly (Options), you can work on it y... Show Detail
- No：7587
- Date of Issue：2021/12/07 10:15
- Category： EHF Series
-
WARNING: Be sure to power off the entire system before performing any operation. Do not work while the power is on. Failure to do so may result in electric... Show Detail
- No：7588
- Date of Issue：2021/12/07 10:15
- Category： EHF Series
-
(EHF) Crosshead does not descend
WARNING: Be sure to power off the entire system before performing any operation. Do not work while the power is on. Failure to do so may result in electric... Show Detail
- No：7589
- Date of Issue：2021/12/07 10:15
- Last Updated：2022/01/13 09:18
- Category： EHF Series
-
WARNING: Be sure to power off the entire system before performing any operation. Do not work while the power is on. Failure to do so may result in electric... Show Detail
- No：7591
- Date of Issue：2021/12/07 10:15
- Category： EHF Series
-
(EHF) There is noise and vibration when lifting and lowering
WARNING: Be sure to power off the entire system before performing any operation. Do not work while the power is on. Failure to do so may result in electric... Show Detail
- No：7592
- Date of Issue：2021/12/07 10:15
- Category： EHF Series
101-110 of Total 211