FAQ - Frequently Asked Questions

  • Font Size
  • S
  • M
  • L

Keyword Search

You can search two or more words separated by a space. 
Separate keywords with sapce to search for ALL.
Separate with "｜" to search for EITHER words.
And having "-" at the start of the word will EXCLUDE it.

Materials Testing & Inspection

Frequently Referenced FAQ

Latest FAQ

FAQ within [ Materials Testing & Inspection ]

91-100 of Total 211

≪ 10 / 22page ≫

  • (EHF) Power unit alarm

    If you cannot solve this problem by checking possible causes, contact a Shimadzu sales or service representative. 1. Total Alarm:The power unit has ... Show Detail

    • No：7606
    • Date of Issue：2021/12/07 10:15
    • Category： EHF Series

  • (EHF) Nothing displayed on the LCD panel

    If you cannot solve this problem by checking possible causes and taking appropriate actions described below, contact a Shimadzu sales or service representati... Show Detail

    • No：7605
    • Date of Issue：2021/12/07 10:15
    • Category： EHF Series

  • (EHF) Abnormal measurement value

    If you cannot solve this problem by checking possible causes and taking appropriate actions described below, contact a Shimadzu sales or service representati... Show Detail

    • No：7604
    • Date of Issue：2021/12/07 10:15
    • Category： EHF Series

  • (EHF) Power unit start failure

    If you cannot solve this problem by checking possible causes and taking appropriate actions described below, contact a Shimadzu sales or service representati... Show Detail

    • No：7603
    • Date of Issue：2021/12/07 10:15
    • Category： EHF Series

  • (EHF) Replacing the Battery

    If the clockbattery (CR2032) needs to be replaced,contact a Shimadzu sales or service representative. Show Detail

    • No：7602
    • Date of Issue：2021/12/07 10:15
    • Category： EHF Series

  • (EHF) Storing the EHF Series

    WARNING: • Tighten the crosshead's auxiliary clamp bolts if the unit is to be stored for a long time without using. If this equipment has not been use... Show Detail

    • No：7601
    • Date of Issue：2021/12/07 10:15
    • Category： EHF Series

  • (EHF) System shutdown

    This section outlines how to remove the specimen. For details, refer to the manual of each test jig. WARNING: • Keep away from the loading frame w... Show Detail

    • No：7599
    • Date of Issue：2021/12/07 10:15
    • Category： EHF Series

  • (EHF) The amplitude characteristic deteriorates

    WARNING: Be sure to power off the entire system before performing any operation. Do not work while the power is on. Failure to do so may result in electric... Show Detail

    • No：7596
    • Date of Issue：2021/12/07 10:15
    • Category： EHF Series

  • (EHF) Test waveform distortion

    WARNING: Be sure to power off the entire system before performing any operation. Do not work while the power is on. Failure to do so may result in electric... Show Detail

    • No：7595
    • Date of Issue：2021/12/07 10:15
    • Category： EHF Series

  • (EHF) Out of control

    If not resolved, contact a Shimadzu sales or service representative. Cause1:The sensor cable is not connected, oralmost disconnected. Action1: Conn... Show Detail

    • No：7594
    • Date of Issue：2021/12/07 10:15
    • Category： EHF Series

91-100 of Total 211

To Top of Page

This site uses the FAQ system "PKSHA FAQ", which is a product of PKSHA Communication Inc.