FAQ - Frequently Asked Questions

  • Font Size
  • S
  • M
  • L

Keyword Search

You can search two or more words separated by a space. 
Separate keywords with sapce to search for ALL.
Separate with "｜" to search for EITHER words.
And having "-" at the start of the word will EXCLUDE it.

HPLC

Frequently Referenced FAQ

Latest FAQ

FAQ within [ HPLC ]

851-860 of Total 941

≪ 86 / 95page ≫

  • Error Code:[0x921E]

    «Main Cause» Could not detect the X-direction home position of the autosampler needle. «Countermeasure» Press the (power switch) to turn the power OFF and c... Show Detail

    • No：3444
    • Date of Issue：2020/12/02 16:10
    • Category： Autosampler

  • Error Code:[0x93F4]

    «Main Cause» Results of wavelength accuracy check at instrument startup differ by more than 1nm. There may be bubbles in the flow cell. «Countermeasure» Per... Show Detail

    • No：3443
    • Date of Issue：2020/12/02 16:10
    • Category： Detector

  • Error Code:[0x93F2]

    «Main Cause» Could not detect the grating home position in the detector. «Countermeasure» Press the (power switch) to turn the power OFF and contact a Shim... Show Detail

    • No：3442
    • Date of Issue：2020/12/02 16:10
    • Category： Detector

  • Error Code:[0x93F1]

    «Main Cause» Could not detect the filter home position in the detector. «Countermeasure» Press the (power switch) to turn the power OFF and contact a Shima... Show Detail

    • No：3441
    • Date of Issue：2020/12/02 16:10
    • Category： Detector

  • Error Code:[0x93E4]

    «Main Cause» Failed to receive the detector signal. «Countermeasure» Press the (power switch) to turn the power OFF and contact a Shimadzu sales or service ... Show Detail

    • No：3440
    • Date of Issue：2020/12/02 16:10
    • Category： Detector

  • Error Code:[0x93E2]

    «Main Cause» Failed to receive the detector signal. «Countermeasure» Press the (power switch) to turn the power OFF and contact a Shimadzu sales or service ... Show Detail

    • No：3439
    • Date of Issue：2020/12/02 16:10
    • Category： Detector

  • Error Code:[0x93DC]

    «Main Cause» The heater of the spectrmeter is short or there is a fault in the circuit. «Countermeasure» Press the (power switch) to turn the power OFF and ... Show Detail

    • No：3438
    • Date of Issue：2020/12/02 16:10
    • Category： Detector

  • Error Code:[0x93DB]

    «Main Cause» The optical unit temperature does not reach the set temperature. Temperature control is turned off. «Countermeasure» Contact a Shimadzu sales o... Show Detail

    • No：3437
    • Date of Issue：2020/12/02 16:10
    • Category： Detector

  • Error Code:[0x93DA]

    «Main Cause» The instrument is turned off because the ADC module on the board is malfunctioning. The instrument is stopped. «Countermeasure» Press the (pow... Show Detail

    • No：3436
    • Date of Issue：2020/12/02 16:10
    • Category： Detector

  • Error Code:[0x93D9]

    «Main Cause» Temperature control is turned off because the temperature sensor of the optical unit is malfunctioning. «Countermeasure» Press the (power switc... Show Detail

    • No：3435
    • Date of Issue：2020/12/02 16:10
    • Category： Detector

851-860 of Total 941

To Top of Page

This site uses the FAQ system "PKSHA FAQ", which is a product of PKSHA Communication Inc.