Click [PURGE] to purge the bubbles. Alternatively, connect a syringe to the drain tube connection port to suction out th

Specify an appropriate range value. Set [LAMP] to [D2]. The light source lamp illuminates. Click the [ZERO] button in

Check the light level. If the light level is low even with an air cell or if the lamp has been operated for more than 2

Check whether the noise disappears when solvent delivery stops. Check the solvent delivery flow status (pulsation). If p

Part No. 228-53924-05 Dust Filter 1. Turn OFF power to the instrument. 2. Open the filter cover (A) and then remov

Consumable Parts Number:228-45707-91 SUS Filter Element « Below are the changes for SIL-40C XSi» • R

Consumable Part No. 228-72570-01 Air filter 1. Remove the filter holder (A) on the right side by pressing its right a

Consumable Part No. 228-57501-92 Line Filter (LC-40D X3/XS, 40B X3) 228-35871-96 Line Filter (LC-40D/XR, 40B XR) 228

FAQ - Frequently Asked Questions

Font Size
S
M
L

Products Search > HPLC

Keyword Search

HPLC

Frequently Referenced FAQ

Latest FAQ

FAQ within [ HPLC ]

851-860 of Total 943

≪ 86 / 95page ≫

The baseline undulates with the pump stroke

Click [PURGE] to purge the bubbles. Alternatively, connect a syringe to the drain tube connection port to suction out the bubbles. Click here for Manual P... Show Detail
- No：4296
- Date of Issue：2020/12/03 11:00
- Category： Common , Solvent Delivery Module
- Brached FAQ
The baseline does not change

Specify an appropriate range value. Set [LAMP] to [D2]. The light source lamp illuminates. Click the [ZERO] button in the [RUN] window. Adjust the zero p... Show Detail
- No：4297
- Date of Issue：2020/12/03 11:01
- Category： Detector
- Brached FAQ
Noise level is high

Check the light level. If the light level is low even with an air cell or if the lamp has been operated for more than 2000 hours, then replace the lamp. ... Show Detail
- No：4298
- Date of Issue：2020/12/03 11:03
- Category： Detector
- Brached FAQ
Cyclic spiky noise is output

Check whether the noise disappears when solvent delivery stops. Check the solvent delivery flow status (pulsation). If pulsation is large, rinse the flow ch... Show Detail
- No：4299
- Date of Issue：2020/12/03 11:05
- Category： Common , Detector , Solvent Delivery Module
- Brached FAQ
Sawtooth-shaped noise occurs

Check whether the noise disappears when solvent delivery stops. Check the solvent delivery flow status (pulsation). If pulsation is large, rinse the flow ch... Show Detail
- No：4300
- Date of Issue：2020/12/03 11:06
- Category： Common , Detector , Solvent Delivery Module
- Brached FAQ
Maintenance for SPD-40(V) (Video)

Show Detail
- No：4301
- Date of Issue：2020/12/03 11:16
- Last Updated：2020/12/04 14:53
- Category： Detector
- Brached FAQ
Maintenance for SPD-M40 (Video)

Part No. 228-53924-05 Dust Filter 1. Turn OFF power to the instrument. 2. Open the filter cover (A) and then remove the filter (B). ... Show Detail
- No：4309
- Date of Issue：2020/12/03 13:04
- Category： Detector
- Brached FAQ
Maintenance for SIL-40 series (Video)

Consumable Parts Number:228-45707-91 SUS Filter Element « Below are the changes for SIL-40C XSi» • Ring(B) is added to S... Show Detail
- No：4320
- Date of Issue：2020/12/03 13:40
- Category： Autosampler
- Brached FAQ
Maintenance for CTO-40C/S

Consumable Part No. 228-72570-01 Air filter 1. Remove the filter holder (A) on the right side by pressing its right and left knobs (a). 2. ... Show Detail
- No：4339
- Date of Issue：2020/12/03 13:45
- Category： Column Oven
- Brached FAQ
Maintenance for LC-40 (Pump) series (Video)

Consumable Part No. 228-57501-92 Line Filter (LC-40D X3/XS, 40B X3) 228-35871-96 Line Filter (LC-40D/XR, 40B XR) 228-70796-42 Line Filter (LC-40D ... Show Detail
- No：4340
- Date of Issue：2020/12/03 13:55
- Category： Solvent Delivery Module
- Brached FAQ

851-860 of Total 943

To Top of Page

This site uses the FAQ system "PKSHA FAQ", which is a product of PKSHA Technology Inc.