• Font Size
  • S
  • M
  • L

Frequently Referenced FAQ

FAQ within [ HPLC ]

731-740 of Total 941

74 / 95page
  • Error Code:[0x58F1] ERROR D2 LAMP NOT LIT

    «Main Cause» The illumination circuit is not functioning properly. «Countermeasure» Switch the instrument power OFF and contact a Shimadzu sales or service ... Show Detail

    • No:4084
    • Date of Issue:2020/12/02 16:45
    • Category: Detector
  • Error Code:[0x58F2] FATAL GRATING POSITION

    «Main Cause» Failed to detect the home position for the grating motor. «Countermeasure» Switch the instrument power OFF and contact a Shimadzu sales or serv... Show Detail

    • No:4085
    • Date of Issue:2020/12/02 16:45
    • Category: Detector
  • Error Code:[0x58F3] ERROR CELL MEMORY

    «Main Cause» The cell is not fully connected or the cell memory is not functioning properly. «Countermeasure» Check the cell installation. If that does not ... Show Detail

    • No:4086
    • Date of Issue:2020/12/02 16:45
    • Category: Detector
  • Error Code:[0x58F4] WARNING WL CHECK NO GOOD

    «Main Cause» Wavelength accuracy check failed due to either a cell installation error, a wavelength calibration error, or a sample or bubbles contained in... Show Detail

    • No:4087
    • Date of Issue:2020/12/02 16:45
    • Last Updated:2021/01/20 12:05
    • Category: Detector
  • Error Code:[0x58F7] FATAL MIRROR POSITION

    «Main Cause» Detection of the motor home position failed for the lamp switching mirror control motor. «Countermeasure» Switch the instrument power OFF and c... Show Detail

    • No:4088
    • Date of Issue:2020/12/02 16:45
    • Category: Detector
  • Error Code:[0x5A04]

    «Main Cause» Information in the nonvolatile memory could not be read. «Countermeasure» Calibrate the detector (wavelength calibration, absorbance correction... Show Detail

    • No:4089
    • Date of Issue:2020/12/02 16:45
    • Category: Detector
  • Error Code:[0x5A21]

    «Main Cause» There is a leak in the detector. «Countermeasure» Inspect the detector leak and wipe up any liquid from around the leak sensor. Show Detail

    • No:4090
    • Date of Issue:2020/12/02 16:45
    • Category: Detector
  • Error Code:[0x5A41]

    «Main Cause» Cannot communicate normally between the instrument and workstation. «Countermeasure» Check the communication environment and operating status b... Show Detail

    • No:4091
    • Date of Issue:2020/12/02 16:45
    • Category: Detector
  • Error Code:[0x5A44]

    «Main Cause» Cannot communicate normally between the instrument and workstation. «Countermeasure» Check the communication environment and operating status b... Show Detail

    • No:4092
    • Date of Issue:2020/12/02 16:45
    • Category: Detector
  • Error Code:[0x5A45]

    «Main Cause» Light level exceeded the threshold value due to the long accumulation time. «Countermeasure» Calibrate the accumulation time. Show Detail

    • No:4093
    • Date of Issue:2020/12/02 16:45
    • Category: Detector

731-740 of Total 941

This site uses the FAQ system "PKSHA FAQ", which is a product of PKSHA Communication Inc.