FAQ - Frequently Asked Questions
- Products Search > HPLC
Keyword Search
HPLC
Frequently Referenced FAQ
FAQ within [ HPLC ]
-
Error Code:[0x85F1] REMOVE RACK
«Main Cause» The same rack has been set twice. After analysis is performed for this rack, [RC FULL RACK] error is displayed and the scheduled operation is st... Show Detail
- No：3624
- Date of Issue：2020/12/02 16:30
- Category： Autosampler
-
«Main Cause» There is a stack for which a rack has not been set. When analysis is performed for this rack, [RC NO. RACK] error is displayed and the scheduled... Show Detail
- No：3623
- Date of Issue：2020/12/02 16:30
- Category： Autosampler
-
Error Code:[0x85EE] COOLER ON AGAIN
«Main Cause» The stack was closed and so the sample cooler turned ON. «Countermeasure» - Show Detail
- No：3622
- Date of Issue：2020/12/02 16:30
- Category： Autosampler
-
Error Code:[0x85ED] COOLER OFF
«Main Cause» A stack was left open for more than 30 minutes and so the sample cooler has been turned OFF. «Countermeasure» Close the stack to turn the samp... Show Detail
- No：3621
- Date of Issue：2020/12/02 16:30
- Category： Autosampler
-
Error Code:[0x85EC] CLOSE STACK
«Main Cause» A stack was left open for more than 30 minutes and so the sample cooler has been turned OFF. «Countermeasure» Close the stack. Show Detail
- No：3620
- Date of Issue：2020/12/02 16:30
- Category： Autosampler
-
Error Code:[0x85EA] ERR RC HEATER
«Main Cause» There is an error in the sample cooler's heating unit. «Countermeasure» Turn power OFF and contact a Shimadzu sales or service representative. Show Detail
- No：3619
- Date of Issue：2020/12/02 16:30
- Category： Autosampler
-
Error Code:[0x85E8] RC FULL RACK
«Main Cause» While a rack is being analyzed, another rack is set in its rack position. «Countermeasure» Remove the illegal rack or change it to the condensa... Show Detail
- No：3618
- Date of Issue：2020/12/02 16:30
- Category： Autosampler
-
Error Code:[0x85E0] RC NO RACK
«Main Cause» There was no rack in the position specified for analysis and so the scheduled analysis was stopped. «Countermeasure» Set a rack in a position w... Show Detail
- No：3617
- Date of Issue：2020/12/02 16:30
- Category： Autosampler
-
Error Code:[0x85DD] ERR RC COOLER
«Main Cause» Abnormality in cooler control unit. «Countermeasure» Turn power OFF and contact a Shimadzu sales or service representative. Show Detail
- No：3616
- Date of Issue：2020/12/02 16:30
- Category： Autosampler
-
Error Code:[0x85DC] ERR RC TEMP SENS
«Main Cause» There is an error in the sample cooler's temperature sensor. «Countermeasure» Turn power OFF and contact a Shimadzu sales or service representa... Show Detail
- No：3615
- Date of Issue：2020/12/02 16:30
- Category： Autosampler
671-680 of Total 941