FAQ - Frequently Asked Questions
- Products Search > HPLC
Keyword Search
HPLC
Frequently Referenced FAQ
FAQ within [ HPLC ]
-
Error Code:[0x0034] ERROR LEAK
«Main Cause» Detection of fluid leak due to pump X. «Countermeasure» Inspection the leak place of flow line, etc., and wipe off the fluid around the leak se... Show Detail
- No：3636
- Date of Issue：2020/12/02 16:30
- Category： Solvent Delivery Module
-
Error Code:[0x0032] ERROR HOME POS
«Main Cause» Display when the home position of the pump motor cannot detection, the motor does not operate, or the motor is slipping. «Countermeasure» Once ... Show Detail
- No：3635
- Date of Issue：2020/12/02 16:30
- Category： Solvent Delivery Module
-
Error Code:[0x0031] ERROR P.MIN
«Main Cause» Pump discharge pressure has fallen below the set min. pressure limit, [P.MIN]. Pumping will automatically stop. «Countermeasure» Flow line flui... Show Detail
- No：3634
- Date of Issue：2020/12/02 16:30
- Category： Solvent Delivery Module
-
Error Code:[0x81E2] ERROR OVER HEAT
«Main Cause» Interior temperature has risen to an abnormal level. «Countermeasure» Check to be sure that the internal fan can move, and that the rear exhaus... Show Detail
- No：3633
- Date of Issue：2020/12/02 16:30
- Category： Solvent Delivery Module
-
Error Code:[0x81D4] OPEN DRAIN VALVE
«Main Cause» Pump discharge pressure exceeded [P-PMAX] when purge. «Countermeasure» Open drain valve and press [Purge] button. If an error message appears d... Show Detail
- No：3632
- Date of Issue：2020/12/02 16:30
- Category： Solvent Delivery Module
-
Error Code:[0x8650] ERR OVER T.MAX-L
«Main Cause» The column oven temperature of heater L has exceeded the value set for [T.MAX]. «Countermeasure» (1) Lower the column oven temperature set valu... Show Detail
- No：3631
- Date of Issue：2020/12/02 16:30
- Category： Column Oven
-
Error Code:[0x8638] ERR DOOR SENS
«Main Cause» The door sensor has failed. «Countermeasure» Turn off the power and contact a Shimadzu sales or service representative. Show Detail
- No：3630
- Date of Issue：2020/12/02 16:30
- Category： Column Oven
-
Error Code:[0x8637] ERR COOLBLK FAN
«Main Cause» The block cooling fan is not rotating correctly. «Countermeasure» If anything is interfering with the fan rotation, turn the power OFF and remo... Show Detail
- No：3629
- Date of Issue：2020/12/02 16:30
- Category： Column Oven
-
Error Code:[0x8636] ERR POST COOLER
«Main Cause» The post-column cooler is not rotating correctly. «Countermeasure» If anything is interfering with the fan rotation, turn the power OFF and rem... Show Detail
- No：3628
- Date of Issue：2020/12/02 16:30
- Category： Column Oven
-
«Main Cause» Cannot write to oven :Management Device (CMD). «Countermeasure» Once turn off the power, and turn on the power again. If this message still app... Show Detail
- No：3627
- Date of Issue：2020/12/02 16:30
- Category： System Controller , Column Oven
661-670 of Total 943