• No : 5943
  • Date of Issue : 2021/05/18 15:36
  • Last Updated : 2021/06/09 14:43
  • Print

Detector is not controlled [Error Code:9021]

Ignition or illumination was started when the detector control was set to [Off].
Category : 

Answer

 
＜GC instrument monitor setting＞
 
Press [HOME] > [Detector] on GC instrument monitor.
Turn [On] the detector control and then start ignition or illumination again.
 
 
<Labsolutions setting> 
 
Set the detector control in the device monitor window to [On].
Then start ignition or illumination again.