WARNING: In the event of a malfunction or other problem, such as if an unusual odoror smoke is observed, immediately shu

1. Checking for Samples on the Stage The CT stage is initialized during CT software inspeXio64 startup. CT stage i

CAUTION: If operating the system intermittently (without a long period of disuse), startup the system beginning with "Su

CAUTION:If the system will be operated intermittently (without long periods of disuse),shut down the system according to

1. Close the CT software. (If the software cannot be closed, go to Step 2.) 2. Turn the [OPERATE] key switch counterclo

1. Inspect the lead glass for any scratches or cracks. If nothing unusual isdiscovered, click the [Next] button.

The CT software inspeXio64 determines the tube voltage output permitted based on thelast time the previous aging process

The three-digit status display on the X-ray panel unit can display a blinking code, whichindicates an error state, in ad

1. Click thebutton on the X-ray control area to display the [X-Ray MaintenanceSchedule] window. 2. Click the

Clean the surface of the focus cup and the inside of the X-ray tube vacuum chamber. Perform this procedure when the fil

FAQ - Frequently Asked Questions

Font Size
S
M
L

Products Search > Non-Destructive Testing (NDT) Systems

Keyword Search

Non-Destructive Testing (NDT) Systems

inspeXio SMX-225CT(21)

Frequently Referenced FAQ

Latest FAQ

FAQ within [ Non-Destructive Testing (NDT) Systems ]

41-50 of Total 61

≪ 5 / 7page ≫

(SMX-225CT) In Case of Emergency

WARNING: In the event of a malfunction or other problem, such as if an unusual odoror smoke is observed, immediately shut off power supply to the system bysw... Show Detail
- No：8660
- Date of Issue：2022/05/18 10:52
- Category： inspeXio SMX-225CT
(SMX-225CT) Starting the Software

1. Checking for Samples on the Stage The CT stage is initialized during CT software inspeXio64 startup. CT stage initialization consists of moving the ... Show Detail
- No：8663
- Date of Issue：2022/05/19 10:22
- Category： inspeXio SMX-225CT
(SMX-225CT) Supplying Power to the System

CAUTION: If operating the system intermittently (without a long period of disuse), startup the system beginning with "Supplying Power Inside the System". I... Show Detail
- No：8662
- Date of Issue：2022/05/19 10:32
- Category： inspeXio SMX-225CT
(SMX-225CT) Shutting Down the System

CAUTION:If the system will be operated intermittently (without long periods of disuse),shut down the system according to the procedure described up to "Shutt... Show Detail
- No：8664
- Date of Issue：2022/05/19 10:43
- Category： inspeXio SMX-225CT
(SMX-225CT) Restoring the System After an Error Shutdown

1. Close the CT software. (If the software cannot be closed, go to Step 2.) 2. Turn the [OPERATE] key switch counterclockwise to the [OFF] position. ... Show Detail
- No：8661
- Date of Issue：2022/05/19 10:44
- Category： inspeXio SMX-225CT
- Brached FAQ
(SMX-225CT) Startup Inspections

1. Inspect the lead glass for any scratches or cracks. If nothing unusual isdiscovered, click the [Next] button. WARNING:If the lead glass is scratc... Show Detail
- No：8665
- Date of Issue：2022/05/19 11:18
- Category： inspeXio SMX-225CT
(SMX-225CT) Aging the X-ray generator

The CT software inspeXio64 determines the tube voltage output permitted based on thelast time the previous aging process was finished and the specified volta... Show Detail
- No：8666
- Date of Issue：2022/05/19 11:39
- Category： inspeXio SMX-225CT
(SMX-225CT) Status on the X-ray Panel Unit

The three-digit status display on the X-ray panel unit can display a blinking code, whichindicates an error state, in addition to the solidly indicated 000 a... Show Detail
- No：8674
- Date of Issue：2022/05/19 16:22
- Category： inspeXio SMX-225CT
(SMX-225CT) Replacing the Filament

1. Click thebutton on the X-ray control area to display the [X-Ray MaintenanceSchedule] window. 2. Click the [Reset] button in [Usage time after ... Show Detail
- No：8677
- Date of Issue：2022/05/20 14:00
- Last Updated：2022/05/26 14:25
- Category： inspeXio SMX-225CT
- Brached FAQ
(SMX-225CT) Cleaning the X-ray Tube Vacuum Chamber (Video)

Clean the surface of the focus cup and the inside of the X-ray tube vacuum chamber. Perform this procedure when the filament is replaced or when aging does ... Show Detail
- No：8678
- Date of Issue：2022/05/23 09:04
- Last Updated：2022/05/26 14:23
- Category： inspeXio SMX-225CT

41-50 of Total 61

To Top of Page

This site uses the FAQ system "PKSHA FAQ", which is a product of PKSHA Communication Inc.