Output the information related to the usage status of the instrument. If a problem occurs with the instrument, you may

There is a status LED on the right side of the system that displays a three-digit number(Status Code). The status cod

If the condition does notimprove even after performing Action 1 -3,contacta Shimadzu sales or service representative.

If the condition does notimprove even after performing Action 1 -3,contact a Shimadzu sales or service representative.

Trouble1: No exterior image isdisplayed. Cause1-1: The exterior image cameramay be faulty. Cause1-2: There may be a

Cause1:Is the sample moving duringimage scanning? Action1:Fix the sample in place withtape or other means. Cau

Cause: Unevenness and noise influoroscopic images may becaused by deterioration of theflat panel detector over time.

Cause1: Are X-rays being irradiated? Action1: Irradiate X-rays. Cause2:The X-ray image can becompletely black

Cause1:Is the key switch ON? Action1: Turn the key switch ON. Cause2:Is origin point returncompleted? Action2

Cause1:Is the key switch ON? Action1: Turn the key switch ON. Cause2:Is the OPERATE button ON? Action2: T

FAQ - Frequently Asked Questions

Font Size
S
M
L

Products Search > Non-Destructive Testing (NDT) Systems > Xslicer SMX-6010

Keyword Search

Frequently Referenced FAQ

Latest FAQ

FAQ within [ Xslicer SMX-6010 ]

1-10 of Total 26

≪ 1 / 3page ≫

(SMX-6010) Outputting the Instrument Information

Output the information related to the usage status of the instrument. If a problem occurs with the instrument, you may be required to output the instrumenti... Show Detail
- No：8630
- Date of Issue：2022/05/17 09:26
- Last Updated：2022/05/17 09:49
(SMX-6010) Status Code

There is a status LED on the right side of the system that displays a three-digit number(Status Code). The status code can display a blinking code, which ... Show Detail
- No：8614
- Date of Issue：2022/04/28 15:00
(SMX-6010) The X-RAY ON/OFF button remains gray and X-ray...

If the condition does notimprove even after performing Action 1 -3,contacta Shimadzu sales or service representative. Cause1: Is the front door comple... Show Detail
- No：8613
- Date of Issue：2022/04/28 14:32
(SMX-6010) The X-ray alarm occurs frequently

If the condition does notimprove even after performing Action 1 -3,contact a Shimadzu sales or service representative. Action1:Repeatedly turn X-rays ONan... Show Detail
- No：8612
- Date of Issue：2022/04/28 14:29
(SMX-6010) Exterior Image trouble

Trouble1: No exterior image isdisplayed. Cause1-1: The exterior image cameramay be faulty. Cause1-2: There may be a faultyconnection or disconnectioninsi... Show Detail
- No：8611
- Date of Issue：2022/04/28 14:14
(SMX-6010) Cross-section images are blurry

Cause1:Is the sample moving duringimage scanning? Action1:Fix the sample in place withtape or other means. Cause2: Cross-section images can beblurr... Show Detail
- No：8610
- Date of Issue：2022/04/28 14:10
(SMX-6010) There is unevenness or noise in X-ray images

Cause: Unevenness and noise influoroscopic images may becaused by deterioration of theflat panel detector over time. Action:Calibrate the flat paneldetect... Show Detail
- No：8609
- Date of Issue：2022/04/28 14:05
(SMX-6010) The X-ray image is completely black

Cause1: Are X-rays being irradiated? Action1: Irradiate X-rays. Cause2:The X-ray image can becompletely black if X-rayoutput is too low. Action2: ... Show Detail
- No：8608
- Date of Issue：2022/04/28 14:03
(SMX-6010) The stage does not move

Cause1:Is the key switch ON? Action1: Turn the key switch ON. Cause2:Is origin point returncompleted? Action2:Restart the control softwareand comp... Show Detail
- No：8607
- Date of Issue：2022/04/28 14:01
(SMX-6010) The chamber light fails to come on

Cause1:Is the key switch ON? Action1: Turn the key switch ON. Cause2:Is the OPERATE button ON? Action2: Turn the OPERATE button ON. C... Show Detail
- No：8606
- Date of Issue：2022/04/28 13:55

1-10 of Total 26

To Top of Page

This site uses the FAQ system "PKSHA FAQ", which is a product of PKSHA Communication Inc.