FAQ - Frequently Asked Questions
- Products Search > Non-Destructive Testing (NDT) Systems
Keyword Search
Non-Destructive Testing (NDT) Systems
Frequently Referenced FAQ
FAQ within [ Non-Destructive Testing (NDT) Systems ]
-
(SMX-6010) Cross-section images are blurry
Cause1:Is the sample moving duringimage scanning? Action1:Fix the sample in place withtape or other means. Cause2: Cross-section images can beblurr... Show Detail
- No：8610
- Date of Issue：2022/04/28 14:10
- Category： Xslicer SMX-6010
-
(SMX-1010/1020) There is unevenness or noise in X-ray images
Cause: Unevenness and noise influoroscopic images may becaused by deterioration of theflat panel detector over time. Action:Calibrate the flat paneldetect... Show Detail
- No：8624
- Date of Issue：2022/04/28 14:05
- Category： Xslicer SMX-1010/1020
-
(SMX-6010) There is unevenness or noise in X-ray images
Cause: Unevenness and noise influoroscopic images may becaused by deterioration of theflat panel detector over time. Action:Calibrate the flat paneldetect... Show Detail
- No：8609
- Date of Issue：2022/04/28 14:05
- Category： Xslicer SMX-6010
-
(SMX-1010/1020) The X-ray image is completely black
Cause1: Are X-rays emitted? Action1: Emit X-rays. Cause2:The X-ray image can becompletely black if X-rayoutput is too low. Action2: Change the tub... Show Detail
- No：8623
- Date of Issue：2022/04/28 14:03
- Category： Xslicer SMX-1010/1020
-
(SMX-6010) The X-ray image is completely black
Cause1: Are X-rays being irradiated? Action1: Irradiate X-rays. Cause2:The X-ray image can becompletely black if X-rayoutput is too low. Action2: ... Show Detail
- No：8608
- Date of Issue：2022/04/28 14:03
- Category： Xslicer SMX-6010
-
(SMX-1010/1020) The stage does not move
Cause1:Is the SYSTEM key switch ON? Action1: Turn ON the SYSTEM keyswitch. Cause2:Is the OPERATE switch ON? Action2:Turn ON the OPERATE switch. ... Show Detail
- No：8622
- Date of Issue：2022/04/28 14:01
- Category： Xslicer SMX-1010/1020
-
(SMX-6010) The stage does not move
Cause1:Is the key switch ON? Action1: Turn the key switch ON. Cause2:Is origin point returncompleted? Action2:Restart the control softwareand comp... Show Detail
- No：8607
- Date of Issue：2022/04/28 14:01
- Category： Xslicer SMX-6010
-
(SMX-1010/1020) The interior light does not light up
Cause1:Is the SYSTEM key switch ON? Action1: Turn ON the SYSTEM keyswitch. Cause2:Is the OPERATE switch ON? Action2: Turn ON the OPERATE switc... Show Detail
- No：8621
- Date of Issue：2022/04/28 13:55
- Category： Xslicer SMX-1010/1020
-
(SMX-6010) The chamber light fails to come on
Cause1:Is the key switch ON? Action1: Turn the key switch ON. Cause2:Is the OPERATE button ON? Action2: Turn the OPERATE button ON. C... Show Detail
- No：8606
- Date of Issue：2022/04/28 13:55
- Category： Xslicer SMX-6010
-
(SMX-6010) Opening to the Atmosphere
Opening to the atmosphere is the operation in which the interior of the X-ray generatorthat is a vacuum is filled with air. This operation is required when p... Show Detail
- No：8596
- Date of Issue：2022/04/28 13:36
- Category： Xslicer SMX-6010
31-40 of Total 61