This system emits X-rays by irradiating a target with a focused electron beam. The tungsten can melt and vaporize, ca

Clean the surface of the focus cup and the inside of the X-ray tube vacuum chamber. Perform this procedure when the fil

1. Click thebutton on the X-ray control area to display the [X-Ray MaintenanceSchedule] window. 2. Click the

The three-digit status display on the X-ray panel unit can display a blinking code, whichindicates an error state, in ad

The CT software inspeXio64 determines the tube voltage output permitted based on thelast time the previous aging process

1. Inspect the lead glass for any scratches or cracks. If nothing unusual isdiscovered, click the [Next] button.

1. Close the CT software. (If the software cannot be closed, go to Step 2.) 2. Turn the [OPERATE] key switch counterclo

CAUTION:If the system will be operated intermittently (without long periods of disuse),shut down the system according to

CAUTION: If operating the system intermittently (without a long period of disuse), startup the system beginning with "Su

1. Checking for Samples on the Stage The CT stage is initialized during CT software inspeXio64 startup. CT stage i

FAQ - Frequently Asked Questions

Font Size
S
M
L

Products Search > Non-Destructive Testing (NDT) Systems

Keyword Search

Non-Destructive Testing (NDT) Systems

inspeXio SMX-225CT(21)

Frequently Referenced FAQ

Latest FAQ

FAQ within [ Non-Destructive Testing (NDT) Systems ]

11-20 of Total 61

≪ 2 / 7page ≫

(SMX-225CT) Rotating the X-ray Tube Head Tungsten Target

This system emits X-rays by irradiating a target with a focused electron beam. The tungsten can melt and vaporize, caused a rough targetsurface, which can... Show Detail
- No：8680
- Date of Issue：2022/05/23 09:11
- Category： inspeXio SMX-225CT
(SMX-225CT) Cleaning the X-ray Tube Vacuum Chamber (Video)

Clean the surface of the focus cup and the inside of the X-ray tube vacuum chamber. Perform this procedure when the filament is replaced or when aging does ... Show Detail
- No：8678
- Date of Issue：2022/05/23 09:04
- Last Updated：2022/05/26 14:23
- Category： inspeXio SMX-225CT
(SMX-225CT) Replacing the Filament

1. Click thebutton on the X-ray control area to display the [X-Ray MaintenanceSchedule] window. 2. Click the [Reset] button in [Usage time after ... Show Detail
- No：8677
- Date of Issue：2022/05/20 14:00
- Last Updated：2022/05/26 14:25
- Category： inspeXio SMX-225CT
- Brached FAQ
(SMX-225CT) Status on the X-ray Panel Unit

The three-digit status display on the X-ray panel unit can display a blinking code, whichindicates an error state, in addition to the solidly indicated 000 a... Show Detail
- No：8674
- Date of Issue：2022/05/19 16:22
- Category： inspeXio SMX-225CT
(SMX-225CT) Aging the X-ray generator

The CT software inspeXio64 determines the tube voltage output permitted based on thelast time the previous aging process was finished and the specified volta... Show Detail
- No：8666
- Date of Issue：2022/05/19 11:39
- Category： inspeXio SMX-225CT
(SMX-225CT) Startup Inspections

1. Inspect the lead glass for any scratches or cracks. If nothing unusual isdiscovered, click the [Next] button. WARNING:If the lead glass is scratc... Show Detail
- No：8665
- Date of Issue：2022/05/19 11:18
- Category： inspeXio SMX-225CT
(SMX-225CT) Restoring the System After an Error Shutdown

1. Close the CT software. (If the software cannot be closed, go to Step 2.) 2. Turn the [OPERATE] key switch counterclockwise to the [OFF] position. ... Show Detail
- No：8661
- Date of Issue：2022/05/19 10:44
- Category： inspeXio SMX-225CT
- Brached FAQ
(SMX-225CT) Shutting Down the System

CAUTION:If the system will be operated intermittently (without long periods of disuse),shut down the system according to the procedure described up to "Shutt... Show Detail
- No：8664
- Date of Issue：2022/05/19 10:43
- Category： inspeXio SMX-225CT
(SMX-225CT) Supplying Power to the System

CAUTION: If operating the system intermittently (without a long period of disuse), startup the system beginning with "Supplying Power Inside the System". I... Show Detail
- No：8662
- Date of Issue：2022/05/19 10:32
- Category： inspeXio SMX-225CT
(SMX-225CT) Starting the Software

1. Checking for Samples on the Stage The CT stage is initialized during CT software inspeXio64 startup. CT stage initialization consists of moving the ... Show Detail
- No：8663
- Date of Issue：2022/05/19 10:22
- Category： inspeXio SMX-225CT

11-20 of Total 61

To Top of Page

This site uses the FAQ system "PKSHA FAQ", which is a product of PKSHA Communication Inc.