Turn the power OFF and then ON. Then recheck the display. If the problem persists, repairs will be necessary, so cont

Turn the power OFF and then ON. Then recheck the display. If the problem persists,repairs will be necessary, so conta

If the shape of the indentation is abnormal as shown in below,the indenter attachment is malfunctioning or is improperly

If the Indentation shape is abnormal as shown in below, the indenter mounting part may be defective. Replace the defecti

1. “Slide sample stage to load side” is displayed at the start of test • Causes1:The stage has not been moved to und

Cause1: Alarm occurs. Measures1: Turn on the motor control box. Connect the emergency stop SW. The emergency stop

CAUTION:When starting program, the X-Y stage returns to an original position. So, lower the stage soas not to damage an

If the DUH series hardness tester normally operates, the test status displayed in the test window is changed to “Indente

FAQ - Frequently Asked Questions

Font Size
S
M
L

Products Search > Materials Testing & Inspection > Hardness Tester

Keyword Search

Hardness Tester

Frequently Referenced FAQ

Latest FAQ

FAQ within [ Hardness Tester ]

31-38 of Total 38

≪ 4 / 4page ≫

(HMV) If the READY lamp is not lit with the power ON

Turn the power OFF and then ON. Then recheck the display. If the problem persists, repairs will be necessary, so contact a Shimadzu sales or service repre... Show Detail
- No：7495
- Date of Issue：2021/12/06 11:48
- Category： Micro Hardness Tester(HMV)
(HMV) If nothing is displayed with the power ON

Turn the power OFF and then ON. Then recheck the display. If the problem persists,repairs will be necessary, so contact a Shimadzu sales or service repres... Show Detail
- No：7496
- Date of Issue：2021/12/06 11:48
- Category： Micro Hardness Tester(HMV)
(HMV) If the indentation has an abnormal shape

If the shape of the indentation is abnormal as shown in below,the indenter attachment is malfunctioning or is improperly adjusted. In this case, contact a S... Show Detail
- No：7497
- Date of Issue：2021/12/06 11:48
- Category： Micro Hardness Tester(HMV)
(DUH) Indentation shape is abnormal

If the Indentation shape is abnormal as shown in below, the indenter mounting part may be defective. Replace the defective part with a new one. For replaceme... Show Detail
- No：7523
- Date of Issue：2021/12/06 11:48
- Category： Dynamic Ultra-micro Hardness Tester(DUH)
(DUH) Trouble during the test

1. “Slide sample stage to load side” is displayed at the start of test • Causes1:The stage has not been moved to under the indenter. Before starting ... Show Detail
- No：7524
- Date of Issue：2021/12/06 11:48
- Category： Dynamic Ultra-micro Hardness Tester(DUH)
(DUH) The stage does not move

Cause1: Alarm occurs. Measures1: Turn on the motor control box. Connect the emergency stop SW. The emergency stop SW is turnedoff. Cause2:The mot... Show Detail
- No：7525
- Date of Issue：2021/12/06 11:48
- Category： Dynamic Ultra-micro Hardness Tester(DUH)
(DUH) Starting X-Y stage program

CAUTION:When starting program, the X-Y stage returns to an original position. So, lower the stage soas not to damage an indenter before starting program. ... Show Detail
- No：7527
- Date of Issue：2021/12/06 11:48
- Category： Dynamic Ultra-micro Hardness Tester(DUH)
(DUH) Balance Adjustment/Depth Detector Adjustment

If the DUH series hardness tester normally operates, the test status displayed in the test window is changed to “Indenter down” and the displayed test force ... Show Detail
- No：7517
- Date of Issue：2021/12/16 14:45
- Category： Dynamic Ultra-micro Hardness Tester(DUH)
- Brached FAQ

31-38 of Total 38

To Top of Page

This site uses the FAQ system "PKSHA FAQ", which is a product of PKSHA Communication Inc.