• No : 3870
  • Date of Issue : 2020/12/02 16:43
  • Print

Error Code:[0x910F] ERROR PRESSURE MIN

Error Message: Pump: The pumping was stopped because pressure does not reach P.Min. Check the flow paths for leaks, and check the minimum pressure setting.
Category : 

Answer

«Main Cause»
Solvent delivery was stopped because the pressure did not reach the lower limit pressure value.
 
«Countermeasure»
Inspect the flow channels for leakage. If no problems are found, reset the [P.Min] value in instrument parameters to an appropriate value. This error is disabled for one minute after delivery starts.