• No : 3426
  • Date of Issue : 2020/12/02 16:10
  • Last Updated : 2020/12/07 11:19
  • Print

Error Code:[0x93CC]

Error Message: The detector W lamp is not connected.
Category : 

Answer

«Main Cause»
The W lamp connector is not connected.
Alternatively, the W lamp cable is broken or there is a fault in the board.
 
«Countermeasure»
Follow the procedures below in the following order.
(1) Connect the W lamp connector.
(2) Replace the W lamp.
    Click here for Replacement method of Lamp (HPLC)
(3) If the error is not resolved, press the (power switch) to turn the power OFF and contact a Shimadzu sales or service representative.