FAQ - Frequently Asked Questions
- Products Search > Materials Testing & Inspection > Autograph(AG) > AGS-X Series > (AGS-X) Attaching Specimens (Bending Test)
(AGS-X) Attaching Specimens (Bending Test)
(AGS-X) Attaching Specimens (Bending Test)
- Category :
Answer
1. Adjust the distance between supports.
2. Place the specimen in the center of the supports.
3. Use jog operations to move the bending punch a little above the specimen.
2. Place the specimen in the center of the supports.
3. Use jog operations to move the bending punch a little above the specimen.
If it needs to move a long distance, move it with [HIGH SPEED] ON, then after it is closer, move it with [HIGH SPEED] OFF.
4. Zero the test force.
4. Zero the test force.
CAUTION: Make sure the bending punch does not contact the specimen.
May I have your opinion?
This site uses the FAQ system "PKSHA FAQ", which is a product of PKSHA Communication Inc.