FAQ - Frequently Asked Questions
- Products Search > Materials Testing & Inspection > Autograph(AG) > EZ-Test Series > (EZ-Test) Attaching Specimens
(EZ-Test) Attaching Specimens
(EZ-Test) Attaching Specimens
- Category :
Answer
1. Attaching the Specimen
CAUTION: Make sure the specimen does not hit the lower grip during jog operations.
1) Insert the specimen at the center of the grip faces.
2) Turn the opening closing handle to hold the specimen Tighten securely with both hands
2) Turn the opening closing handle to hold the specimen Tighten securely with both hands
3) Use jog operations to insert the specimen between the lower grip faces.
4) Press [FORCE] to reset the test force to zero
4) Press [FORCE] to reset the test force to zero
5) Turn t he opening closing handle to hold the specimen Tighten securely with both hands
2. Eliminate Any Initial Test Forces
Eliminate any initial test forces that occurred when the lower grips were tightened.
May I have your opinion?
This site uses the FAQ system "PKSHA FAQ", which is a product of PKSHA Communication Inc.