FAQ - Frequently Asked Questions
- Products Search > HPLC > Solvent Delivery Module
Keyword Search
Frequently Referenced FAQ
FAQ within [ Solvent Delivery Module ]
-
Error Code:[0x81E8] ERROR NO CONST.PRS
«Main Cause» The system controller specified the constant-pressure pump mode while a solvent delivery pump without constant-pressure pumping capability is be... Show Detail
- No:3857
- Date of Issue:2020/12/02 16:43
-
Error Code:[0x81E9] ERROR EXTERNAL INPUT
«Main Cause» An error signal was input to the external input terminal. «Countermeasure» Check the connected external device and remove the cause of the error. Show Detail
- No:3858
- Date of Issue:2020/12/02 16:43
-
Error Code:[0x9101] WARNING MOBILE PHASE A1
«Main Cause» The remaining level of the A-1 mobile phase solution is low. «Countermeasure» Replace the mobile phase and reset the mobile phase quantity. Show Detail
- No:3859
- Date of Issue:2020/12/02 16:43
-
Error Code:[0x9102] WARNING MOBILE PHASE B1
«Main Cause» The remaining level of the B-1 mobile phase solution is low. «Countermeasure» Replace the mobile phase and reset the mobile phase quantity. Show Detail
- No:3860
- Date of Issue:2020/12/02 16:43
-
Error Code:[0x9103] WARNING MOBILE PHASE C1
«Main Cause» The remaining level of the C-1 mobile phase solution is low. «Countermeasure» Replace the mobile phase and reset the mobile phase quantity. Show Detail
- No:3861
- Date of Issue:2020/12/02 16:43
-
Error Code:[0x9104] WARNING MOBILE PHASE D1
«Main Cause» The remaining level of the D-1 mobile phase solution is low. «Countermeasure» Replace the mobile phase and reset the mobile phase quantity. Show Detail
- No:3862
- Date of Issue:2020/12/02 16:43
-
Error Code:[0x9105] WARNING MOBILE PHASE A2
«Main Cause» The remaining level of the A-2 mobile phase solution is low. «Countermeasure» Replace the mobile phase and reset the mobile phase quantity. Show Detail
- No:3863
- Date of Issue:2020/12/02 16:43
-
Error Code:[0x9106] WARNING MOBILE PHASE B2
«Main Cause» The remaining level of the B-2 mobile phase solution is low. «Countermeasure» Replace the mobile phase and reset the mobile phase quantity. Show Detail
- No:3864
- Date of Issue:2020/12/02 16:43
-
Error Code:[0x9107] WARNING MOBILE PHASE C2
«Main Cause» The remaining level of the C-2 mobile phase solution is low. «Countermeasure» Replace the mobile phase and reset the mobile phase quantity. Show Detail
- No:3865
- Date of Issue:2020/12/02 16:43
-
Error Code:[0x9108] WARNING MOBILE PHASE D2
«Main Cause» The remaining level of the D-2 mobile phase solution is low. «Countermeasure» Replace the mobile phase and reset the mobile phase quantity. Show Detail
- No:3866
- Date of Issue:2020/12/02 16:43
31-40 of Total 72