FAQ - Frequently Asked Questions

  • Font Size
  • S
  • M
  • L

Keyword Search

You can search two or more words separated by a space. 
Separate keywords with sapce to search for ALL.
Separate with "｜" to search for EITHER words.
And having "-" at the start of the word will EXCLUDE it.

Frequently Referenced FAQ

Latest FAQ

FAQ within [ Solvent Delivery Module ]

21-30 of Total 72

≪ 3 / 8page ≫

  • Error Code:[0x9117] FATAL INSIDE FAN

    «Main Cause» A motor cooling fan rotation problem was detected. «Countermeasure» Switch the instrument power OFF and contact a Shimadzu sales or service rep... Show Detail

    • No：3878
    • Date of Issue：2020/12/02 16:44

  • Error Code:[0x9116] ERROR OPEN DRAIN VALVE

    «Main Cause» Solvent delivery was stopped because pressure became high during purging. «Countermeasure» If an error message is displayed during auto-purging... Show Detail

    • No：3877
    • Date of Issue：2020/12/02 16:44

  • Error Code:[0x9115] WARNING MOBILE PHASE D

    «Main Cause» The remaining level of the D mobile phase solution is low. «Countermeasure» Replace the mobile phase and reset the mobile phase quantity. Show Detail

    • No：3876
    • Date of Issue：2020/12/02 16:44

  • Error Code:[0x9114] WARNING MOBILE PHASE C

    «Main Cause» The remaining level of the C mobile phase solution is low. «Countermeasure» Replace the mobile phase and reset the mobile phase quantity. Show Detail

    • No：3875
    • Date of Issue：2020/12/02 16:43

  • Error Code:[0x9113] WARNING MOBILE PHASE B

    «Main Cause» The remaining level of the B mobile phase solution is low. «Countermeasure» Replace the mobile phase and reset the mobile phase quantity. Show Detail

    • No：3874
    • Date of Issue：2020/12/02 16:43

  • Error Code:[0x9112] WARNING MOBILE PHASE A

    «Main Cause» The remaining level of the A mobile phase solution is low. «Countermeasure» Replace the mobile phase and reset the mobile phase quantity. Show Detail

    • No：3873
    • Date of Issue：2020/12/02 16:43

  • Error Code:[0x9111] ERROR LEAK DETECTED

    «Main Cause» Solvent delivery was stopped because leakage was detected in the solvent delivery pump. «Countermeasure» Inspect the tubing connections and oth... Show Detail

    • No：3872
    • Date of Issue：2020/12/02 16:43

  • Error Code:[0x9110] ERROR HOME POSITION

    «Main Cause» Solvent delivery is stopped because the home position of a motor cannot be detected. «Countermeasure» Switch the instrument power OFF and then ... Show Detail

    • No：3871
    • Date of Issue：2020/12/02 16:43

  • Error Code:[0x910F] ERROR PRESSURE MIN

    «Main Cause» Solvent delivery was stopped because the pressure did not reach the lower limit pressure value. «Countermeasure» Inspect the flow channels for ... Show Detail

    • No：3870
    • Date of Issue：2020/12/02 16:43

  • Error Code:[0x910E] ERROR PRESSURE MAX

    «Main Cause» Solvent delivery was stopped because the pressure exceeded the upper pressure limit value. «Countermeasure» Inspect the flow channels for block... Show Detail

    • No：3869
    • Date of Issue：2020/12/02 16:43

21-30 of Total 72

To Top of Page

This site uses the FAQ system "PKSHA FAQ", which is a product of PKSHA Technology Inc.