«Main Cause» A broken circuit may have occurred in the cell heater. «Countermeasure» Switch the instrument power OFF an

«Main Cause» A broken circuit may have occurred in the leak sensor. «Countermeasure» Switch the instrument power OFF an

«Main Cause» A leak sensor short circuit may have occurred. «Countermeasure» Switch the instrument power OFF and contac

«Main Cause» A broken circuit may have occurred in the cell temperature sensor. «Countermeasure» Switch the instrument

«Main Cause» Cannot write data to D2 memory. «Countermeasure» Check the D2 lamp connection. If that does no

«Main Cause» Information in the D2 lamp memory could not be read. «Countermeasure» Contact a Shimadzu sales or service

«Main Cause» Analysis was started without connecting the flow cell. «Countermeasure» Connect the cell to the main unit.

«Main Cause» The temperature did not decrease to the setting temperature even after five minutes of temperature control.

«Main Cause» The temperature-controlled cell control circuit is not functioning properly. «Countermeasure» Switch the i

«Main Cause» There is a leak in the detector. «Countermeasure» Inspect the detector leak and wipe up any liquid from ar

FAQ - Frequently Asked Questions

Font Size
S
M
L

Products Search > HPLC > Detector

Keyword Search

Frequently Referenced FAQ

Latest FAQ

FAQ within [ Detector ]

101-110 of Total 266

≪ 11 / 27page ≫

Error Code:[0x5881] ERROR CELL HEATER

«Main Cause» A broken circuit may have occurred in the cell heater. «Countermeasure» Switch the instrument power OFF and contact a Shimadzu sales or service... Show Detail
- No：4062
- Date of Issue：2020/12/02 16:45
Error Code:[0x5879] FATAL LEAK SENSOR

«Main Cause» A broken circuit may have occurred in the leak sensor. «Countermeasure» Switch the instrument power OFF and contact a Shimadzu sales or service... Show Detail
- No：4061
- Date of Issue：2020/12/02 16:45
Error Code:[0x5878] FATAL LEAK SENSOR

«Main Cause» A leak sensor short circuit may have occurred. «Countermeasure» Switch the instrument power OFF and contact a Shimadzu sales or service represe... Show Detail
- No：4060
- Date of Issue：2020/12/02 16:45
Error Code:[0x5870] ERROR CELL TEMP SENSOR

«Main Cause» A broken circuit may have occurred in the cell temperature sensor. «Countermeasure» Switch the instrument power OFF and contact a Shimadzu sale... Show Detail
- No：4059
- Date of Issue：2020/12/02 16:45
Error Code:[0x5869] WARING D2 TIME NOT UPDATED

«Main Cause» Cannot write data to D2 memory. «Countermeasure» Check the D2 lamp connection. If that does not resolve the error, replace the D2 l... Show Detail
- No：4058
- Date of Issue：2020/12/02 16:45
- Last Updated：2020/12/07 11:14
Error Code:[0x5868] WARNING D2 NOT GENUINE

«Main Cause» Information in the D2 lamp memory could not be read. «Countermeasure» Contact a Shimadzu sales or service representative. Show Detail
- No：4057
- Date of Issue：2020/12/02 16:45
Error Code:[0x5864] WARNING CELL NOT CONNECTED

«Main Cause» Analysis was started without connecting the flow cell. «Countermeasure» Connect the cell to the main unit. Show Detail
- No：4056
- Date of Issue：2020/12/02 16:45
Error Code:[0x5863] WARNING CELL LOW SET TEMP

«Main Cause» The temperature did not decrease to the setting temperature even after five minutes of temperature control. «Countermeasure» Specify a somewhat... Show Detail
- No：4055
- Date of Issue：2020/12/02 16:45
Error Code:[0x5861] FATAL CELL TEMP

«Main Cause» The temperature-controlled cell control circuit is not functioning properly. «Countermeasure» Switch the instrument power OFF and contact a Shi... Show Detail
- No：4054
- Date of Issue：2020/12/02 16:45
Error Code:[0x5821] ERROR LEAK DETECTED

«Main Cause» There is a leak in the detector. «Countermeasure» Inspect the detector leak and wipe up any liquid from around the leak sensor. Show Detail
- No：4053
- Date of Issue：2020/12/02 16:45

101-110 of Total 266

To Top of Page

This site uses the FAQ system "PKSHA FAQ", which is a product of PKSHA Communication Inc.