«Main Cause» The variable specified by a FOR command in the pretreatment program does not match the variable for the NEX

«Main Cause» There is no corresponding FOR command for a NEXT command in the pretreatment program. «Countermeasure» Add

«Main Cause» The variable specified by a FOR command in the pretreatment program is incorrect. «Countermeasure» Enter t

«Main Cause» There are more than 19 FOR commands within a FOR command in the pretreatment program. «Countermeasure» Set

«Main Cause» There is no corresponding IF command for an ENDIF command in the pretreatment program. «Countermeasure» Ad

«Main Cause» The pretreatment program has more than 19 IF commands in its IF command block. «Countermeasure» Set it to

«Main Cause» Analysis was started two or more times in the pretreatment program. «Countermeasure» Revise the pretreatme

«Main Cause» The setting value for the EVENT command in the pretreatment program exceeds the setting range. «Countermea

«Main Cause» The CALL command calls more than 19 times in the pretreatment program. «Countermeasure» Set it to 19 or fe

«Main Cause» The file number specified by the CALL command in the pretreatment program exceeds the setting range. «Coun

FAQ - Frequently Asked Questions

Font Size
S
M
L

Products Search > HPLC > Autosampler

Keyword Search

Frequently Referenced FAQ

Latest FAQ

FAQ within [ Autosampler ]

81-90 of Total 298

≪ 9 / 30page ≫

Error Code:[0x5261] ERROR PFILE NEXT VAR

«Main Cause» The variable specified by a FOR command in the pretreatment program does not match the variable for the NEXT command. «Countermeasure» Enter th... Show Detail
- No：3978
- Date of Issue：2020/12/02 16:44
Error Code:[0x5260] ERROR PFILE NEXT NO FOR

«Main Cause» There is no corresponding FOR command for a NEXT command in the pretreatment program. «Countermeasure» Add a FOR command. Show Detail
- No：3977
- Date of Issue：2020/12/02 16:44
Error Code:[0x525F] ERROR PFILE FOR VAR

«Main Cause» The variable specified by a FOR command in the pretreatment program is incorrect. «Countermeasure» Enter the correct variable. Show Detail
- No：3976
- Date of Issue：2020/12/02 16:44
Error Code:[0x525E] ERROR PFILE FOR COUNT

«Main Cause» There are more than 19 FOR commands within a FOR command in the pretreatment program. «Countermeasure» Set it to 19 or fewer. Show Detail
- No：3975
- Date of Issue：2020/12/02 16:44
Error Code:[0x525D] ERROR PFILE NO IF CMD

«Main Cause» There is no corresponding IF command for an ENDIF command in the pretreatment program. «Countermeasure» Add an IF command. Show Detail
- No：3974
- Date of Issue：2020/12/02 16:44
Error Code:[0x525C] ERROR PFILE TOO MANY IF

«Main Cause» The pretreatment program has more than 19 IF commands in its IF command block. «Countermeasure» Set it to 19 or fewer. Show Detail
- No：3973
- Date of Issue：2020/12/02 16:44
Error Code:[0x525B] ERROR PFILE 2nd S.INJ

«Main Cause» Analysis was started two or more times in the pretreatment program. «Countermeasure» Revise the pretreatment program so that the analysis start... Show Detail
- No：3972
- Date of Issue：2020/12/02 16:44
Error Code:[0x525A] ERROR PFILE EVENT VALUE

«Main Cause» The setting value for the EVENT command in the pretreatment program exceeds the setting range. «Countermeasure» Change the setting to a value w... Show Detail
- No：3971
- Date of Issue：2020/12/02 16:44
Error Code:[0x5259] ERROR PFILE CALL TIMES

«Main Cause» The CALL command calls more than 19 times in the pretreatment program. «Countermeasure» Set it to 19 or fewer times. Show Detail
- No：3970
- Date of Issue：2020/12/02 16:44
Error Code:[0x5258] ERROR PFILE CALL FILE #

«Main Cause» The file number specified by the CALL command in the pretreatment program exceeds the setting range. «Countermeasure» Change the setting to a v... Show Detail
- No：3969
- Date of Issue：2020/12/02 16:44

81-90 of Total 298

To Top of Page

This site uses the FAQ system "PKSHA FAQ", which is a product of PKSHA Communication Inc.