1. Fill the mobile phase A flow line with an organic solvent such as 2-propanol, methanol, or acetonitrile. NOTE: Afte

Parts Number: 228-53184-91 SUS tubing HP OUT(0.1 × 600) (For CTO-20A/20AC) Parts Number: 228-53881-42 Preheart bl

Used when the instrument is not to be used for a long time or before moving the instrument. [CONTROL] - [ZHOME]

When using a rinsing liquid with a hydrocarbon solvent such as hexane as the main component, suction problems can occur

Adjusting the injection port position «ADJUST INJ. P» WARINING: Do NOT put your hand inside the autosampler whi

[PARAMETER] → [NEEDLE STROKE]. or It setting by softwae. This sets the distance at which the needle lowers into a s

Adjusting the plate position «ADJUST PLATE» WARNING: Do NOT put your hand inside the autosampler while the inst

FAQ - Frequently Asked Questions

Font Size
S
M
L

Products Search > HPLC > Autosampler

Keyword Search

Frequently Referenced FAQ

Latest FAQ

FAQ within [ Autosampler ]

291-297 of Total 297

≪ 30 / 30page ≫

Replacement of HPV Rotor and Stator (HPLC)

1. Fill the mobile phase A flow line with an organic solvent such as 2-propanol, methanol, or acetonitrile. NOTE: After the high-pressure valve rotor and s... Show Detail
- No：4481
- Date of Issue：2020/12/04 16:01
- Last Updated：2021/07/12 11:35
- Brached FAQ
Replacement of Outlet Tubing (HPLC)

Parts Number: 228-53184-91 SUS tubing HP OUT(0.1 × 600) (For CTO-20A/20AC) Parts Number: 228-53881-42 Preheart block 30AS(0.1 × 800) (For CTO-30AS) ... Show Detail
- No：4763
- Date of Issue：2020/12/04 16:01
- Brached FAQ
(LC) Moving the needle position<ZHOME>

Used when the instrument is not to be used for a long time or before moving the instrument. [CONTROL] - [ZHOME] or Pressing directly moves from ... Show Detail
- No：4476
- Date of Issue：2020/12/07 12:55
HPLC: When hexane is used in the rinse solution of the au...

When using a rinsing liquid with a hydrocarbon solvent such as hexane as the main component, suction problems can occur irregularly. When such a problem o... Show Detail
- No：4630
- Date of Issue：2020/12/22 13:09
(HPLC) Autosampler Adjusting the injection port position

Adjusting the injection port position «ADJUST INJ. P» WARINING: Do NOT put your hand inside the autosampler while the instrument is operating. Dur... Show Detail
- No：4804
- Date of Issue：2021/01/19 12:51
- Brached FAQ
(HPLC) SIL Setting the distance at which the needle lower...

[PARAMETER] → [NEEDLE STROKE]. or It setting by softwae. This sets the distance at which the needle lowers into a sample vial. Pressing [→] opens a set... Show Detail
- No：4825
- Date of Issue：2021/01/21 10:26
- Brached FAQ
(HPLC) SIL Adjusting the plate position

Adjusting the plate position «ADJUST PLATE» WARNING: Do NOT put your hand inside the autosampler while the instrument is operating. During adjustm... Show Detail
- No：4816
- Date of Issue：2021/01/21 10:28
- Brached FAQ

291-297 of Total 297

To Top of Page

This site uses the FAQ system "PKSHA FAQ", which is a product of PKSHA Communication Inc.