«Main Cause» The injection volume exceeds the maximum injection volume setting value. «Countermeasure» Change the injec

«Main Cause» The pretreatment program size exceeded the limit value (max. 255 bytes per file or 4,096 bytes for the enti

«Main Cause» A blockage was detected in the high pressure flow channels inside the autosampler. «Countermeasure» Perfor

«Main Cause» The sample plate type does not match the type specified in the method file or the barcode label attached to

«Main Cause» A command not present in the pretreatment program is specified. «Countermeasure» Check the command.

«Main Cause» A variable not present in the pretreatment program is specified. «Countermeasure» Check the variable.

«Main Cause» The liquid volume specified by the PURGE.RP or PURGE.ML command in the pretreatment program exceeds the set

«Main Cause» The suction speed specified by the PURGE.RP or PURGE.ML command in the pretreatment program exceeds the set

«Main Cause» The liquid volume specified for suction in the pretreatment program exceeds the setting range. «Countermea

FAQ - Frequently Asked Questions

Font Size
S
M
L

Products Search > HPLC > Autosampler

Keyword Search

Frequently Referenced FAQ

Latest FAQ

FAQ within [ Autosampler ]

171-180 of Total 299

≪ 18 / 30page ≫

Error Code:[0x5232] ERROR INJ VOLUME

«Main Cause» The injection volume exceeds the maximum injection volume setting value. «Countermeasure» Change the injection volume to a value less than the ... Show Detail
- No：3931
- Date of Issue：2020/12/02 16:44
Error Code:[0x5233] ERROR PFILE

«Main Cause» The pretreatment program size exceeded the limit value (max. 255 bytes per file or 4,096 bytes for the entire program). «Countermeasure» Optimi... Show Detail
- No：3932
- Date of Issue：2020/12/02 16:44
Error Code:[0x5234] WARNING DETECT CLOGGING

«Main Cause» A blockage was detected in the high pressure flow channels inside the autosampler. «Countermeasure» Perform auto-purge. Show Detail
- No：3933
- Date of Issue：2020/12/02 16:44
Error Code:[0x5235] ERROR DETECT CLOGGING

«Main Cause» A blockage was detected in the high pressure flow channels inside the autosampler. «Countermeasure» Perform auto-purge. Show Detail
- No：3934
- Date of Issue：2020/12/02 16:44
Error Code:[0x5236] ERROR MISMATCH PLATE

«Main Cause» The sample plate type does not match the type specified in the method file or the barcode label attached to the sample plate does not match the ... Show Detail
- No：3935
- Date of Issue：2020/12/02 16:44
Error Code:[0x5237] ERROR PFILE ILLEGAL CMD

«Main Cause» A command not present in the pretreatment program is specified. «Countermeasure» Check the command. Show Detail
- No：3936
- Date of Issue：2020/12/02 16:44
Error Code:[0x5238] ERROR PFILE ILLEGAL VAL

«Main Cause» A variable not present in the pretreatment program is specified. «Countermeasure» Check the variable. Show Detail
- No：3937
- Date of Issue：2020/12/02 16:44
Error Code:[0x5239] ERROR PFILE PURGE VOL

«Main Cause» The liquid volume specified by the PURGE.RP or PURGE.ML command in the pretreatment program exceeds the setting range. «Countermeasure» Change ... Show Detail
- No：3938
- Date of Issue：2020/12/02 16:44
Error Code:[0x523A] ERROR PFILE PURGE SPEED

«Main Cause» The suction speed specified by the PURGE.RP or PURGE.ML command in the pretreatment program exceeds the setting range. «Countermeasure» Change ... Show Detail
- No：3939
- Date of Issue：2020/12/02 16:44
Error Code:[0x523B] ERROR PFILE ASPIR VOL

«Main Cause» The liquid volume specified for suction in the pretreatment program exceeds the setting range. «Countermeasure» Change the setting to a value w... Show Detail
- No：3940
- Date of Issue：2020/12/02 16:44

171-180 of Total 299

To Top of Page

This site uses the FAQ system "PKSHA FAQ", which is a product of PKSHA Technology Inc.