«Main Cause» The needle position was not adjusted based on the given sample plate. «Countermeasure» Adjust the needle p

«Main Cause» The remaining level of rinse solution R3 is low. «Countermeasure» Add more rinse solution R3.

«Main Cause» The remaining level of rinse solution R2 is low. «Countermeasure» Add more rinse solution R2.

«Main Cause» The remaining level of rinse solution R1 is low. «Countermeasure» Add more rinse solution R1.

«Main Cause» The remaining level of rinse solution R0 is low. «Countermeasure» Add more rinse solution R0.

«Main Cause» The remaining rinse solution level is low. «Countermeasure» Add more rinse solution.

«Main Cause» The needle position was not adjusted based on the injection port. «Countermeasure» Adjust the

«Main Cause» The needle position was not adjusted based on the given plate. «Countermeasure» Adjust the needle position

«Main Cause» The front panel could not be detected. «Countermeasure» Make sure the front panel is properly.

«Main Cause» No sample plate is located at the tray number specified in the sequence. «Countermeasure» Place a sample p

FAQ - Frequently Asked Questions

Font Size
S
M
L

Products Search > HPLC > Autosampler

Keyword Search

Frequently Referenced FAQ

Latest FAQ

FAQ within [ Autosampler ]

131-140 of Total 297

≪ 14 / 30page ≫

Error Code:[0x522E] WARNING PLATE ADJUST

«Main Cause» The needle position was not adjusted based on the given sample plate. «Countermeasure» Adjust the needle position based on the given sample plate. Show Detail
- No：3927
- Date of Issue：2020/12/02 16:44
Error Code:[0x522D] WARNING RINSE SOLUTION R3

«Main Cause» The remaining level of rinse solution R3 is low. «Countermeasure» Add more rinse solution R3. Show Detail
- No：3926
- Date of Issue：2020/12/02 16:44
Error Code:[0x522C] WARNING RINSE SOLUTION R2

«Main Cause» The remaining level of rinse solution R2 is low. «Countermeasure» Add more rinse solution R2. Show Detail
- No：3925
- Date of Issue：2020/12/02 16:44
Error Code:[0x522B] WARNING RINSE SOLUTION R1

«Main Cause» The remaining level of rinse solution R1 is low. «Countermeasure» Add more rinse solution R1. Show Detail
- No：3924
- Date of Issue：2020/12/02 16:44
Error Code:[0x522A] WARNING RINSE SOLUTION R0

«Main Cause» The remaining level of rinse solution R0 is low. «Countermeasure» Add more rinse solution R0. Show Detail
- No：3923
- Date of Issue：2020/12/02 16:44
Error Code:[0x5229] WARNING RINSE SOLUTION

«Main Cause» The remaining rinse solution level is low. «Countermeasure» Add more rinse solution. Show Detail
- No：3922
- Date of Issue：2020/12/02 16:44
Error Code:[0x5228] WARNING ADJUST INJ.PORT

«Main Cause» The needle position was not adjusted based on the injection port. «Countermeasure» Adjust the needle position based on the injectio... Show Detail
- No：3921
- Date of Issue：2020/12/02 16:44
- Last Updated：2021/01/19 12:59
Error Code:[0x5227] WARNING ADJUST PLATE

«Main Cause» The needle position was not adjusted based on the given plate. «Countermeasure» Adjust the needle position based on the given plate. Show Detail
- No：3920
- Date of Issue：2020/12/02 16:44
Error Code:[0x5226] ERROR NO FRONT PANEL

«Main Cause» The front panel could not be detected. «Countermeasure» Make sure the front panel is properly. If the error is not resolved, press... Show Detail
- No：3919
- Date of Issue：2020/12/02 16:44
- Last Updated：2020/12/04 10:54
Error Code:[0x5225] ERROR NO PLATE

«Main Cause» No sample plate is located at the tray number specified in the sequence. «Countermeasure» Place a sample plate in the tray number position spec... Show Detail
- No：3918
- Date of Issue：2020/12/02 16:44

131-140 of Total 297

To Top of Page

This site uses the FAQ system "PKSHA FAQ", which is a product of PKSHA Communication Inc.