FAQ - Frequently Asked Questions

  • Font Size
  • S
  • M
  • L

Keyword Search

You can search two or more words separated by a space. 
Separate keywords with sapce to search for ALL.
Separate with "｜" to search for EITHER words.
And having "-" at the start of the word will EXCLUDE it.

Frequently Referenced FAQ

Latest FAQ

FAQ within [ Autosampler ]

121-130 of Total 297

≪ 13 / 30page ≫

  • Error Code:[0x5200] FATAL SYSTEM ERROR

    «Main Cause» A system error occurred. «Countermeasure» Switch the power OFF and contact a Shimadzu sales or service representative. Show Detail

    • No：3881
    • Date of Issue：2020/12/02 16:44

  • Error Code:[0x5201] FATAL NOT PROTECTED

    «Main Cause» The configuration settings failed to be retrieved. «Countermeasure» If an error occurs each time started, contact a Shimadzu sales or service r... Show Detail

    • No：3882
    • Date of Issue：2020/12/02 16:44

  • Error Code:[0x5202] FATAL NOT CONNECT XZ

    «Main Cause» Communication with the X-axis and Z-axis motor control board failed. «Countermeasure» Contact a Shimadzu sales or service representative. Show Detail

    • No：3883
    • Date of Issue：2020/12/02 16:44

  • Error Code:[0x5203] FATAL NOT CONNECT PLB

    «Main Cause» Communication with the measuring pump and low pressure valve control board failed. «Countermeasure» Contact a Shimadzu sales or service represe... Show Detail

    • No：3884
    • Date of Issue：2020/12/02 16:44

  • Error Code:[0x5204] FATAL NOT CONNECT SENS

    «Main Cause» Communication with the plate reading board failed. «Countermeasure» Contact a Shimadzu sales or service representative. Show Detail

    • No：3885
    • Date of Issue：2020/12/02 16:44

  • Error Code:[0x5205] ERROR X HOME POSITION

    «Main Cause» Something is obstructing the needle's line of movement or there is a mechanical problem in the drive unit. «Countermeasure» Check for any obstr... Show Detail

    • No：3886
    • Date of Issue：2020/12/02 16:44

  • Error Code:[0x5206] ERROR X SLIP

    «Main Cause» Something is obstructing the X-direction (left-right) line of movement or there is a mechanical problem in the drive unit. «Countermeasure» Che... Show Detail

    • No：3887
    • Date of Issue：2020/12/02 16:44

  • Error Code:[0x5207] ERROR Y HOME POSITION

    «Main Cause» Something is obstructing the needle's line of movement or there is a mechanical problem in the drive unit. «Countermeasure» Check for any obstr... Show Detail

    • No：3888
    • Date of Issue：2020/12/02 16:44

  • Error Code:[0x5208] ERROR Y SLIP

    «Main Cause» Something is obstructing the Y-direction (front-rear) line of movement or there is a mechanical problem in the drive unit. «Countermeasure» Che... Show Detail

    • No：3889
    • Date of Issue：2020/12/02 16:44

  • Error Code:[0x5209] FATAL Z HOME POSITION

    «Main Cause» Something is obstructing the needle's line of movement or there is a mechanical problem in the drive unit. «Countermeasure» Check for any obstr... Show Detail

    • No：3890
    • Date of Issue：2020/12/02 16:44

121-130 of Total 297

To Top of Page

This site uses the FAQ system "PKSHA FAQ", which is a product of PKSHA Communication Inc.