FAQ - Frequently Asked Questions

  • Font Size
  • S
  • M
  • L

Keyword Search

You can search two or more words separated by a space. 
Separate keywords with sapce to search for ALL.
Separate with "｜" to search for EITHER words.
And having "-" at the start of the word will EXCLUDE it.

Frequently Referenced FAQ

Latest FAQ

FAQ within [ EHF Series ]

1-10 of Total 28

≪ 1 / 3page ≫

  • (EHF) Replacing the Load cell

    1.With the Hydraulic Power Supply stopped, screw the "Screw Rod" into the center of the actuator piston tip. 2.After inserting "Ring Wedge" into "Screw Rod"... Show Detail

    • No：7600
    • Date of Issue：2021/12/08 15:45
    • Brached FAQ

  • (EHF) Test preparation

    1.After starting the Hydraulic Power Supply, press the LOAD key on the front of the control unit. 2.A confirmation screen is displayed on the LCD panel. Pre... Show Detail

    • No：7598
    • Date of Issue：2021/12/08 09:27
    • Brached FAQ

  • (EHF) Boot the test system

    To ensure proper operation of the equipment, check the following before using it. 1.Check that the power cables of the control unit, Hydraulic Power Supply,... Show Detail

    • No：7597
    • Date of Issue：2021/12/08 09:27
    • Brached FAQ

  • (EHF) External alarm cannot be canceled

    If you cannot solve this problem by checking possible causes and taking appropriate actions described below, contact a Shimadzu sales or service representati... Show Detail

    • No：7612
    • Date of Issue：2021/12/07 10:15

  • (EHF) Operation disabled

    If you cannot solve this problem by checking possible causes and taking appropriate actions described below, contact a Shimadzu sales or service representati... Show Detail

    • No：7611
    • Date of Issue：2021/12/07 10:15

  • (EHF) Status indicator does not light

    If you cannot solve this problem by checking possible causes and taking appropriate actions described below, contact a Shimadzu sales or service representati... Show Detail

    • No：7610
    • Date of Issue：2021/12/07 10:15

  • (EHF) Control switching is not possible

    If you cannot solve this problem by checking possible causes and taking appropriate actions described below, contact a Shimadzu sales or service representati... Show Detail

    • No：7608
    • Date of Issue：2021/12/07 10:15

  • (EHF) TD calibration

    Perform TD (transducer) calibration. 1. Pressing the [Calibration] button on the setup screen opens thecalibration menu screen as shownon the right.... Show Detail

    • No：7607
    • Date of Issue：2021/12/07 10:15
    • Last Updated：2022/01/14 13:01

  • (EHF) Power unit alarm

    If you cannot solve this problem by checking possible causes, contact a Shimadzu sales or service representative. 1. Total Alarm:The power unit has ... Show Detail

    • No：7606
    • Date of Issue：2021/12/07 10:15

  • (EHF) Nothing displayed on the LCD panel

    If you cannot solve this problem by checking possible causes and taking appropriate actions described below, contact a Shimadzu sales or service representati... Show Detail

    • No：7605
    • Date of Issue：2021/12/07 10:15

1-10 of Total 28

To Top of Page

This site uses the FAQ system "PKSHA FAQ", which is a product of PKSHA Communication Inc.