FAQ - Frequently Asked Questions
- Products Search > Materials Testing & Inspection > Servopulser > Windows Software for 4830
Keyword Search
Frequently Referenced FAQ
FAQ within [ Windows Software for 4830 ]
-
(EHF) A TD cannot be selected in the test method screen
In the max imum value / mean value entry box and the minimumvalue / amp value entry box, a test force TD different from the'Control mode' TD can only be sele... Show Detail
- No：7633
- Date of Issue：2021/12/07 10:15
-
(EHF) Step settings cannot be configured (program functio...
• [Control change]is always set in the first step. This settingcannot be deleted or moved. • An external input waveform can only be used for the final step.... Show Detail
- No：7632
- Date of Issue：2021/12/07 10:15
-
(EHF) The set number of cycles disappears
When the [Unclear set up cycles]checkbox is not selected,cycle numbers set manually in the [Cycle trigger setup] dialogbox and data samp ling table will be c... Show Detail
- No：7631
- Date of Issue：2021/12/07 10:15
-
(EHF) An item cannot be set or selected
• For a static characteristic test, 4 point bend cannot be selected. • The stress is calculated using VTD1 (virtual transducer 1).When VTD1 is in use, this ... Show Detail
- No：7630
- Date of Issue：2021/12/07 10:15
-
(EHF) Dynamic characteristic values cannot be retained
Storage of dynamic characteristic values is possible from thefirst to the 1000th calculation. If the number of dynamiccharacteristic calculations exceeds 100... Show Detail
- No：7629
- Date of Issue：2021/12/07 10:15
-
(EHF) Operation during testing is different from the sett...
• When the step mode is [Auto], [Pause]steps will not be valid. • The test may pause for several seconds at a trig ger output step. • The time until a trig... Show Detail
- No：7628
- Date of Issue：2021/12/07 10:15
-
(EHF) A graph or list cannot be displayed
The peak and characteristic graph appears for the followingtests: • Program function test • Fatigue / Endurance test • Combination test • Frequency s... Show Detail
- No：7627
- Date of Issue：2021/12/07 10:15
-
(EHF) Load indication is not possible
The [Load ON]button can only be used after P.U.1 or P.U.2 isstarted. Show Detail
- No：7625
- Date of Issue：2021/12/07 10:15
- Last Updated：2022/01/14 13:46
-
(EHF) The AGC function or the waveform distortion functio...
The AGC function and the waveform distortion function cannot be used simultaneously. Show Detail
- No：7623
- Date of Issue：2021/12/07 10:15
- Last Updated：2022/01/14 13:45
-
(EHF) The peak value of the response waveform is differen...
The peak value of the response waveform is different from thepeak value of the set signal because correction targets thefrequency elements (amplitudes) of th... Show Detail
- No：7622
- Date of Issue：2021/12/07 10:15
11-20 of Total 29