If you cannot solve this problem by checking possible causes and taking appropriate actions described below, contact a S

If the clockbattery (CR2032) needs to be replaced,contact a Shimadzu sales or service representative.

WARNING: • Tighten the crosshead's auxiliary clamp bolts if the unit is to be stored for a long time without using.

This section outlines how to remove the specimen. For details, refer to the manual of each test jig. WARNING: • Kee

WARNING: Be sure to power off the entire system before performing any operation. Do not work while the power is on. Fai

If not resolved, contact a Shimadzu sales or service representative. Cause1:The sensor cable is not connected, oralm

WARNING: Be sure to power off the entire system before performing any operation. Do not work while the power is on. Fai

FAQ - Frequently Asked Questions

Font Size
S
M
L

Products Search > Materials Testing & Inspection > Servopulser

Keyword Search

Servopulser

Frequently Referenced FAQ

Latest FAQ

FAQ within [ Servopulser ]

41-50 of Total 57

≪ 5 / 6page ≫

(EHF) Power unit start failure

If you cannot solve this problem by checking possible causes and taking appropriate actions described below, contact a Shimadzu sales or service representati... Show Detail
- No：7603
- Date of Issue：2021/12/07 10:15
- Category： EHF Series
(EHF) Replacing the Battery

If the clockbattery (CR2032) needs to be replaced,contact a Shimadzu sales or service representative. Show Detail
- No：7602
- Date of Issue：2021/12/07 10:15
- Category： EHF Series
(EHF) Storing the EHF Series

WARNING: • Tighten the crosshead's auxiliary clamp bolts if the unit is to be stored for a long time without using. If this equipment has not been use... Show Detail
- No：7601
- Date of Issue：2021/12/07 10:15
- Category： EHF Series
(EHF) System shutdown

This section outlines how to remove the specimen. For details, refer to the manual of each test jig. WARNING: • Keep away from the loading frame w... Show Detail
- No：7599
- Date of Issue：2021/12/07 10:15
- Category： EHF Series
(EHF) The amplitude characteristic deteriorates

WARNING: Be sure to power off the entire system before performing any operation. Do not work while the power is on. Failure to do so may result in electric... Show Detail
- No：7596
- Date of Issue：2021/12/07 10:15
- Category： EHF Series
(EHF) Test waveform distortion

WARNING: Be sure to power off the entire system before performing any operation. Do not work while the power is on. Failure to do so may result in electric... Show Detail
- No：7595
- Date of Issue：2021/12/07 10:15
- Category： EHF Series
(EHF) Out of control

If not resolved, contact a Shimadzu sales or service representative. Cause1:The sensor cable is not connected, oralmost disconnected. Action1: Conn... Show Detail
- No：7594
- Date of Issue：2021/12/07 10:15
- Category： EHF Series
(EHF) The crosshead moves during testing

WARNING: Be sure to power off the entire system before performing any operation. Do not work while the power is on. Failure to do so may result in electric... Show Detail
- No：7593
- Date of Issue：2021/12/07 10:15
- Category： EHF Series
(EHF) There is noise and vibration when lifting and lowering

WARNING: Be sure to power off the entire system before performing any operation. Do not work while the power is on. Failure to do so may result in electric... Show Detail
- No：7592
- Date of Issue：2021/12/07 10:15
- Category： EHF Series
(EHF) The crosshead descends

WARNING: Be sure to power off the entire system before performing any operation. Do not work while the power is on. Failure to do so may result in electric... Show Detail
- No：7591
- Date of Issue：2021/12/07 10:15
- Category： EHF Series

41-50 of Total 57

To Top of Page

This site uses the FAQ system "PKSHA FAQ", which is a product of PKSHA Technology Inc.