FAQ - Frequently Asked Questions
- Products Search > GC > GC-2030
Keyword Search
GC-2030
Frequently Referenced FAQ
FAQ within [ GC-2030 ]
-
SCD exhaust for vacuum error[Error Code:6113]
Determine the cause of the leak by referring to the table below. If the error persists, turn off the main power of the instrument, stop gas supply, and co... Show Detail
- No：5956
- Date of Issue：2021/05/18 15:37
- Last Updated：2021/06/03 17:16
- Category： Error/Warning
-
SCD furnace abs. press warning[Error Code:9077]
Replace the inner pyrotube. ※Replace the inner pyrotube MaintenanceHelp_SCD-Inner-Pyrotube-Replacement.pdf ※Reset the counter [HOME] - [Det... Show Detail
- No：5955
- Date of Issue：2021/05/18 15:37
- Last Updated：2021/06/03 15:50
- Category： Error/Warning
-
SCD out pyrotube use time warn.[Error Code:9074]
Replace the outer pyrotube and then reset the counter. ※Replace the outer pyrotube MaintenanceHelp_SCD-Outer-Pyrotube-Replacement.pdf ※Reset... Show Detail
- No：5954
- Date of Issue：2021/05/18 15:37
- Last Updated：2021/06/03 15:53
- Category： Error/Warning
-
SCD in pyrotube use time warn[Error Code:9073]
Replace the inner pyrotube and then reset the counter. ※Replace the inner pyrotube MaintenanceHelp_SCD-Inner-Pyrotube-Replacement.pdf ※ Rese... Show Detail
- No：5953
- Date of Issue：2021/05/18 15:37
- Last Updated：2021/06/03 15:00
- Category： Error/Warning
-
Processing, unable to start[Error Code:9054]
Wait for the analysis to finish before starting the next analysis. Show Detail
- No：5952
- Date of Issue：2021/05/18 15:37
- Last Updated：2021/06/03 14:40
- Category： Error/Warning
-
Not execute this operation [Error Code:9061]
The following operation was executed while theGC stopped. • Ignition/Illumination • FTD Feedback • Start analysis • Batch • Clean Up • PREP RUN • ... Show Detail
- No：5951
- Date of Issue：2021/05/18 15:37
- Category： Error/Warning
- Brached FAQ
-
SCD ozone scrub. use time warn. [Error Code:9072]
The risk of ozone entering the exhaust from the vacuum pump increases. Replace the filling materials of the ozone scrubber and then reset the counter. ... Show Detail
- No：5950
- Date of Issue：2021/05/18 15:37
- Last Updated：2021/06/09 16:51
- Category： Error/Warning
-
SCD vacuum pump use time warn. [Error Code:9071]
Replace or maintain the vacuum pump and then reset the counter. SCD vacuum pump replacement MaintenanceHelp_SCD-Vacuum-Pump-Onspection.pdf Cou... Show Detail
- No：5949
- Date of Issue：2021/05/18 15:37
- Last Updated：2021/06/09 16:40
- Category： Error/Warning
-
Gas Selector# purge set point not reached [Error Code:234...
Check whether gas is supplied and whether gas is not leaking from connections. Gas leaks may be occurring in several locations (other than displayed site). Show Detail
- No：5920
- Date of Issue：2021/05/18 15:37
- Last Updated：2021/06/12 01:28
- Category： Error/Warning
-
Gas Selector# main set point not reached [Error Code:2346...
Check whether gas is supplied and whether gas is not leaking from connections. Gas leaks may be occurring in several locations (other than displayed site). Show Detail
- No：5919
- Date of Issue：2021/05/18 15:37
- Last Updated：2021/06/12 01:27
- Category： Error/Warning
41-50 of Total 225