Turn off the main power of the instrument, stop gas supply, and contact your Shimadzu sales/service representative.

Turn off the main power of the instrument and check the installation status of the cooling fan. If it is installed corr

Turn off the main power of the instrument, stop gas supply, and contact your Shimadzu sales/service representative.

Replace the inner pyrotube. MaintenanceHelp_SCD-Inner-Pyrotube-Replacement.pdf If the error is displayed even

Turn off the main power of the instrument, stop gas supply, and contact your Shimadzu sales/service representative to as

FAQ - Frequently Asked Questions

Font Size
S
M
L

Products Search > GC

Keyword Search

GC

Consumables(6)

Frequently Referenced FAQ

Latest FAQ

FAQ within [ GC ]

41-50 of Total 255

≪ 5 / 26page ≫

INJ1-DET2 relay error [Error Code:1046]

Turn off the main power of the instrument, stop gas supply, and contact your Shimadzu sales/service representative. Show Detail
- No：5864
- Date of Issue：2021/05/18 15:38
- Last Updated：2021/06/04 13:06
- Category： Error/Warning
COL relay error [Error Code:1045]

Turn off the main power of the instrument, stop gas supply, and contact your Shimadzu sales/service representative. Show Detail
- No：5863
- Date of Issue：2021/05/18 15:38
- Last Updated：2021/06/04 13:05
- Category： Error/Warning
Power controller board com. failed [Error Code:4045]

Turn off the main power of the instrument, stop gas supply, and contact your Shimadzu sales/service representative. Show Detail
- No：5862
- Date of Issue：2021/05/18 15:38
- Last Updated：2021/06/04 13:00
- Category： Error/Warning
DET#1 2 3 4 FPD cooling fan error [Error Code:4121 4122 4...

Turn off the main power of the instrument and check the installation status of the cooling fan. If it is installed correctly, the hardware fails. Turn off ... Show Detail
- No：5861
- Date of Issue：2021/05/18 15:38
- Last Updated：2021/06/04 14:04
- Category： Error/Warning
SCD detector abs. press is high [Error Code:9079]

Turn off the main power of the instrument, stop gas supply, and contact your Shimadzu sales/service representative. Show Detail
- No：5860
- Date of Issue：2021/05/18 15:38
- Last Updated：2021/06/04 12:56
- Category： Error/Warning
xxx sensor error [Error Code:1026 1027 1028 1029 1030 103...

Turn off the main power of the instrument, stop gas supply, and contact your Shimadzu sales/service representative. Show Detail
- No：5859
- Date of Issue：2021/05/18 15:38
- Last Updated：2021/06/04 12:55
- Category： Error/Warning
xxx sensor is down [Error Code:1018 1019 1020 1021 1022 1...

Turn off the main power of the instrument, stop gas supply, and contact your Shimadzu sales/service representative. Show Detail
- No：5858
- Date of Issue：2021/05/18 15:38
- Last Updated：2021/06/04 12:54
- Category： Error/Warning
xxx sensor is short circuit [Error Code:1010 1011 1012 10...

Turn off the main power of the instrument, stop gas supply, and contact your Shimadzu sales/service representative. Show Detail
- No：5857
- Date of Issue：2021/05/18 15:38
- Last Updated：2021/06/04 11:47
- Category： Error/Warning
SCD furnace abs. press was exceeded upper limit [Error Co...

Replace the inner pyrotube. MaintenanceHelp_SCD-Inner-Pyrotube-Replacement.pdf If the error is displayed even after the tube is replaced, turn off ... Show Detail
- No：5856
- Date of Issue：2021/05/18 15:38
- Last Updated：2021/06/04 11:45
- Category： Error/Warning
SCD furnace abs. press fell below lower limit [Error Code...

Turn off the main power of the instrument, stop gas supply, and contact your Shimadzu sales/service representative to ask for part replacement. Show Detail
- No：5855
- Date of Issue：2021/05/18 15:38
- Last Updated：2021/06/04 11:44
- Category： Error/Warning

41-50 of Total 255

To Top of Page

This site uses the FAQ system "PKSHA FAQ", which is a product of PKSHA Communication Inc.