For Ethernet connection, replace the LAN cable.

・Check that the tubing connection destination of the AUX-APC is not blinded. If it is blinded, remove the blind to open

Turn off the main power of the instrument, stop gas supply, and contact your Shimadzu sales/service representative.

・Check that the column is connected. ・Check that the gas main valve is open. ・Check that the gas supply pressure is wi

・Check that the gas main valve is open. ・Check that the gas supply pressure is within the range below. ・

Close the knob of the bypass unit of ECD totally with the ECD gas flow set off. Then, check whether the ECD gas flow on

・Check that the ECD detector gas supply pressure is within the range below. ・Check that the supply pressu

Turn off the main power of the instrument, stop gas supply, and contact your Shimadzu sales/service representative.

FAQ - Frequently Asked Questions

Font Size
S
M
L

Products Search > GC

Keyword Search

GC

Consumables(6)

Frequently Referenced FAQ

Latest FAQ

FAQ within [ GC ]

191-200 of Total 255

≪ 20 / 26page ≫

Message is not accepted[Error Code:4003]

For Ethernet connection, replace the LAN cable. Show Detail
- No：5985
- Date of Issue：2021/05/18 15:35
- Last Updated：2021/06/04 14:52
- Category： Error/Warning
Transmission time out[Error Code:4001]

For Ethernet connection, replace the LAN cable. Show Detail
- No：5984
- Date of Issue：2021/05/18 15:35
- Last Updated：2021/06/04 14:50
- Category： Error/Warning
APCy valve not completely closed[Error Code:2069 2070 207...

・Check that the tubing connection destination of the AUX-APC is not blinded. If it is blinded, remove the blind to open the line to atmosphere. ・If the erro... Show Detail
- No：5983
- Date of Issue：2021/05/18 15:35
- Last Updated：2021/06/04 14:45
- Category： Error/Warning
DetAPCn air valve not completely closed[Error Code:2059 2...

Turn off the main power of the instrument, stop gas supply, and contact your Shimadzu sales/service representative. Show Detail
- No：5982
- Date of Issue：2021/05/18 15:35
- Last Updated：2021/06/04 14:41
- Category： Error/Warning
DetAPCn DCG set point not reached[Error Code:2144 2145 21...

・Check that the column is connected. ・Check that the gas main valve is open. ・Check that the gas supply pressure is within the range below. ・C... Show Detail
- No：5981
- Date of Issue：2021/05/18 15:35
- Last Updated：2021/06/04 14:38
- Category： Error/Warning
DetAPCn ECDG set point not reached[Error Code:2156 2157 2...

・Check that the gas main valve is open. ・Check that the gas supply pressure is within the range below. ・Check that the supply pressure is suf... Show Detail
- No：5980
- Date of Issue：2021/05/18 15:35
- Last Updated：2021/06/04 14:32
- Category： Error/Warning
DetAPCn ECDG valve not completely closed[Error Code:2160 ...

Close the knob of the bypass unit of ECD totally with the ECD gas flow set off. Then, check whether the ECD gas flow on the monitor decreases. When the ECD ... Show Detail
- No：5979
- Date of Issue：2021/05/18 15:35
- Last Updated：2021/06/04 14:01
- Category： Error/Warning
DetAPCn ECDG control irregularity[Error Code:2164 2165 21...

・Check that the ECD detector gas supply pressure is within the range below. ・Check that the supply pressure is sufficient for the ECD detector... Show Detail
- No：5978
- Date of Issue：2021/05/18 15:35
- Last Updated：2021/06/18 15:28
- Category： Error/Warning
DetAPCn hydrogen valve not completely closed[Error Code:2...

Turn off the main power of the instrument, stop gas supply, and contact your Shimadzu sales/service representative. Show Detail
- No：5977
- Date of Issue：2021/05/18 15:35
- Last Updated：2021/06/04 13:48
- Category： Error/Warning
DET#4 SCD overcurrent detected[Error Code:6181]

Turn off the main power of the instrument, stop gas supply, and contact your Shimadzu sales/service representative. Show Detail
- No：5976
- Date of Issue：2021/05/18 15:35
- Last Updated：2021/06/04 13:45
- Category： Error/Warning

191-200 of Total 255

To Top of Page

This site uses the FAQ system "PKSHA FAQ", which is a product of PKSHA Communication Inc.