- Products Search > Materials Testing & Inspection > Autograph(AG) > AGX-V Series > (AGX-V) Attaching a Specimen (Bending Test)
(AGX-V) Attaching a Specimen (Bending Test)
(AGX-V) Attaching a Specimen (Bending Test)
- Category :
Answer
1. Adjust the span (5) in the bending test jig.
2. Move the crosshead to a position that allows a specimen to be placed on the bending support base (4) in the jog operation.
3. Place the specimen (1) on the supports (3) in the middle of each support.
NOTE: Be careful to prevent the bending punch (2) from coming into contact with the specimen (1).
4. Press [Zero reset] of [Force] on the operation screen of the smart controller.
2. Move the crosshead to a position that allows a specimen to be placed on the bending support base (4) in the jog operation.
3. Place the specimen (1) on the supports (3) in the middle of each support.
NOTE: Be careful to prevent the bending punch (2) from coming into contact with the specimen (1).
4. Press [Zero reset] of [Force] on the operation screen of the smart controller.
