• Font Size
  • S
  • M
  • L
  • No : 8849
  • Date of Issue : 2022/06/24 09:31

(LCMS) MS Check

(LCMS-2050) MS Check
 
To check the instrument status, use the sub-interface to run an MS check. To check for any problems in the instrument, it is recommended that an MS check is run in any of the following cases:
• When the vacuum system has been stopped in order to carry out maintenance inside the instrument
• When the instrument has not been operated for an extended period of time
• When the instrument does not operate properly
 
NOTE: The amount of mass axis deviation may fluctuate for a while after starting the vacuum system of the instrument, particularly for high mass (generally m/z 1,000 or more), and the MS check may fail. In such a case, perform the MS check after the instrument is sufficiently stable. It is recommended that you run the MS check after the time specified below has elapsed.
 
  Click here for "Daily Shutdown (LCMS)".
  Click here for "Stopping the Instrument (LCMS)".

May I have your opinion?

Please provide your feedback below. This is for feedback only. You will not receive a response.
This site uses the FAQ system "PKSHA FAQ", which is a product of PKSHA Communication Inc.