FAQ - Frequently Asked Questions

When performing inspection and maintenance work, turn ON power to both the instrument and the PC, verify that a connection has been established, and then move all the drive axes to their home position.
1. Start the MultiNA Control Software. Verify that the instrument and PC are connected.
2. Close the top cover.
3. Select [Move All Axes to Home Position] from the [Instrument] menu in the MultiNA window.

  

  The operation starts and the green indicator LED blinks during execution. A blue status bar is displayed at the bottom left of the window.

  

4. Verify that the operation is complete.
  The blue status bar is no longer displayed, and the green indicator LED is steady lit.
5. Open the top cover.
  Verify that the drive axes have returned to the home position as in the figure below.