FAQ - Frequently Asked Questions
- Products Search > Materials Testing & Inspection > Autograph(AG) > AGX-V Series > (AGX-V) In an Emergency
(AGX-V) In an Emergency
(AGX-V) In an Emergency
- Category :
Answer
Perform the following in case of abnormality that the crosshead does not stop or there is an odor of burning or in case of power failure.
Before starting to use the instrument again, inspect it and if necessary, contact a Shimadzu sales or service representative.
Before starting to use the instrument again, inspect it and if necessary, contact a Shimadzu sales or service representative.
To stop the instrument in an emergency (power failure)
1. Press the emergency stop switch of the instrument.
2. Press the power button of the control box and follow the instructions on the controller screen to turn off the instrument.
3. Turn off the power supply breaker (by pressing it downward) on the rear side of the instrument.
4. Turn off the primary side power supply breaker (of your facility) to cut power supply.
2. Press the power button of the control box and follow the instructions on the controller screen to turn off the instrument.
3. Turn off the power supply breaker (by pressing it downward) on the rear side of the instrument.
4. Turn off the primary side power supply breaker (of your facility) to cut power supply.
« AGX-10kNVD »
« AGX-20kNVD / 50kNVD »
« AGX-50kNV / 100kNV / 300kNV »
« AGX-600kNV »
May I have your opinion?
This site uses the FAQ system "PKSHA FAQ", which is a product of PKSHA Communication Inc.