• Font Size
  • S
  • M
  • L
  • No : 7605
  • Date of Issue : 2021/12/07 10:15
  • Print

(EHF) Nothing displayed on the LCD panel

(EHF) Nothing displayed on the LCD panel
Servo Controller 4830
Category : 

Answer

If you cannot solve this problem by checking possible causes and taking appropriate actions described below, contact a Shimadzu sales or service representative.
 
Cause: The touch panel is in the power-OFF status.
Action: Touch the panel, to restore it from the power-OFF status.
 
Pressing the [SYSTEM SETUP] [LCD] button on the setup screen opens the setup screen as shown on the right.
Once a Display Off time is specified, the display will be turned OFF if it is not operated for the specified duration.
The touch panel display will be turned ON with a touch of the panel in the OFF status. If this parameter is set to “0”, the display is kept in the ON status.
The setting range is 0 to 9999 min.

May I have your opinion?

Please provide your feedback below. This is for feedback only. You will not receive a response.
This site uses the FAQ system "PKSHA FAQ", which is a product of PKSHA Communication Inc.