FAQ - Frequently Asked Questions
- Products Search > Materials Testing & Inspection > Hardness Tester > Micro Hardness Tester(HMV) > (HMV) Replacing and Adjusting the Objective Lens
- No : 7478
- Date of Issue : 2021/12/06 11:21
(HMV) Replacing and Adjusting the Objective Lens
(HMV) Replacing and Adjusting the Objective Lens
Replace the objective lens if it degrades due to damage or severe surface contamination and becomes difficult to see through.
While gripping the base of the old lens, turn it to remove it. Then attach a new lens.
While gripping the base of the old lens, turn it to remove it. Then attach a new lens.
If the objective lens has been replaced, adjusting the magnification is requested.
Parts Number: HMV-G30, HMV-G20, HMV-G31, HMV-G21, HMV-G31-XY, HMV-G-XY
344-89941-40 Objective Lens (×10) (D type)
347-25400 Objective Lens(×40)
Parts Number: HMV-G31-FA, HMV-G-FA
344-89300-41 Objective Lens(×40) (super long)
347-25575 Objective Lens(×5)
Please select a model.
May I have your opinion?
This site uses the FAQ system "PKSHA FAQ", which is a product of PKSHA Communication Inc.