FAQ - Frequently Asked Questions
- Products Search > GC > GC-2030 > Error/Warning > SCD oxygen primary pressure is not enough[Error Code:6146]
SCD oxygen primary pressure is not enough[Error Code:6146]
The oxygen supply pressure is lower than the lower limit.
- Category :
Answer
- Check that the gas main valve is open.
- Check that the gas supply pressure is within the range below.
- Check that the supply pressure is sufficient for the SCD detector gas to flow.
- Check that no tubing connections are loose and there is no leak.
- Contact your Shimadzu service representative to check the inner diameter and length of used tubing.
May I have your opinion?
This site uses the FAQ system "PKSHA FAQ", which is a product of PKSHA Communication Inc.