• Font Size
  • S
  • M
  • L
  • No : 4889
  • Date of Issue : 2021/01/25 11:36
  • Last Updated : 2021/03/16 16:05
  • Print

(UV) Sipper160 Rinsing Flow Cells

(UV) Sipper160 Rinsing Flow Cells
Category : 

Answer

After measurement is completed, rinse the flow cell with distilled water or detergent each time.
For detergent, use liquid types as shown in the instruction manual.
After rinsing the flow cell, turn OFF the power to the UV with the flow cell inside filled with distilled water. If the inside of the flow cell is dried, the inner wall of the cell may be contaminated with dirt, and as a result bubbles may easily occur.
 
NOTE: When using clinical samples, never forget to rinse the flow cell after daily use. Otherwise, fibrous impurities, often contained in such samples, may be solidified in the flow cell, and cause poor measurement repeatability.
 
Dilute concentration: Used in about 2 %

May I have your opinion?

Please provide your feedback below. This is for feedback only. You will not receive a response.
This site uses the FAQ system "PKSHA FAQ", which is a product of PKSHA Communication Inc.