FAQ - Frequently Asked Questions
- Products Search > LC-MS > Maintenance
Keyword Search
Frequently Referenced FAQ
FAQ within [ Maintenance ]
-
(LCMS) Removing / Mounting the Ionization Interface
1. Turn the LC solvent delivery pump OFF. 2. Check that an MS check is not running. 3. Open the front cover. 4. Remove the tubing c... Show Detail
- No：8826
- Date of Issue：2022/06/21 11:05
- Brached FAQ
-
(LCMS) Cleaning the Cooling Fan
1. Remove the dust from the fan filters on the instrument with, for example, avacuum cleaner. Clean the fan filters about every six months. NOTE:W... Show Detail
- No：8823
- Date of Issue：2022/06/20 15:53
-
(LCMS) Consumables (Section Around the Lens)
- No：6474
- Date of Issue：2021/06/23 14:33
- Last Updated：2024/09/30 14:25
-
- No：6472
- Date of Issue：2021/06/23 14:30
- Last Updated：2024/09/30 14:23
-
(LCMS) Consumables (Rotary Pump Oil)
- No：6470
- Date of Issue：2021/06/23 14:28
- Last Updated：2024/09/30 14:24
-
(LCMS) Consumables (Drain Tube)
- No：6468
- Date of Issue：2021/06/23 13:54
- Last Updated：2024/09/30 14:23
-
(LCMS) Consumables (Standard Sample)
- No：6466
- Date of Issue：2021/06/23 13:46
- Last Updated：2024/09/30 14:25
-
•ESI probe /Sub Interface •APCI probe Show Detail
- No：6464
- Date of Issue：2021/06/23 13:46
- Last Updated：2024/09/30 14:24
-
Carry out auto tuning using the ESI unit/IonFocus Unit to perform sensitivity adjustment, resolution adjustment, and mass calibration of the instrument. Per... Show Detail
- No：3294
- Date of Issue：2020/11/18 15:33
- Brached FAQ
-
In manual tuning, the instrument can be adjusted manually while monitoring peaks. If peaks cannot be checked while using manual tuning, execute auto tuning i... Show Detail
- No：3293
- Date of Issue：2020/11/18 15:33
- Brached FAQ
1-10 of Total 23