The compound table must be corrected if the retention time changes because of the instrument status of the use of a co

The S/N ratio can be calculated for each compound. The S/N ratio is quantitatively calculated in accordance with the n

The default setting for the mass range displayed in the Mass Spectrum View is the range measured by the method, but th

When scanning samples with large amounts of contaminants, high noise levels can make it difficult to view correspondin

With default settings, only characteristic mass labels are shown. The following procedure can be used to prevent hidin

For instructions on manual peak integration, refer to the following chapters in the LabSolutions LCMS Instruction Ma

If the data analysis method is specified in the batch table, then data files are analyzed as soon as the realtime batc

This content is for LCMS-2050. Mass-it functionality is used to automatically detect masses applicable for data a

The system configuration and the acquisition conditions during data acquisition are stored in a data file, and the syste

To display an MS spectrum of chromatogram peaks, either click the [Chromatogram View]-[Peak] button or double-click on t

FAQ - Frequently Asked Questions

Font Size
S
M
L

Products Search > LC-MS

Keyword Search

LC-MS

Frequently Referenced FAQ

Latest FAQ

FAQ within [ LC-MS ]

21-30 of Total 133

≪ 3 / 14page ≫

(LCMS) Correcting the Retention Times Manually

The compound table must be corrected if the retention time changes because of the instrument status of the use of a column from a different lot. If only... Show Detail
- No：7894
- Date of Issue：2022/01/24 15:36
- Category： Software
(LCMS) Calculating the S/N Ratio for Each Compound

The S/N ratio can be calculated for each compound. The S/N ratio is quantitatively calculated in accordance with the noise conditions parameters in the met... Show Detail
- No：7892
- Date of Issue：2022/01/24 15:28
- Category： Software
(LCMS) Changing the Spectrum View Mass Range Display Setting

The default setting for the mass range displayed in the Mass Spectrum View is the range measured by the method, but the setting can be changed to display o... Show Detail
- No：7890
- Date of Issue：2022/01/24 15:23
- Category： Software
(LCMS) Excluding Peaks with Low Ion Intensity from the Sp...

When scanning samples with large amounts of contaminants, high noise levels can make it difficult to view corresponding mass spectra. Therefore, when sp... Show Detail
- No：7888
- Date of Issue：2022/01/24 15:20
- Category： Software
(LCMS) Showing All Mass Labels in the Spectrum View

With default settings, only characteristic mass labels are shown. The following procedure can be used to prevent hiding some mass labels. 1. In the ... Show Detail
- No：7886
- Date of Issue：2022/01/24 15:17
- Category： Software
(LCMS) Executing Manual Peak Integration

For instructions on manual peak integration, refer to the following chapters in the LabSolutions LCMS Instruction Manual–Operator’s Guide. •Manual Qua... Show Detail
- No：7884
- Date of Issue：2022/01/24 15:15
- Category： Software
(LCMS) Analyzing MS Data at the Same Time as Realtime Bat...

If the data analysis method is specified in the batch table, then data files are analyzed as soon as the realtime batch acquisition is finished. 1. ... Show Detail
- No：7881
- Date of Issue：2022/01/24 15:13
- Category： Software
(LCMS) Mass-it Function, which Detects the Effective Mass...

This content is for LCMS-2050. Mass-it functionality is used to automatically detect masses applicable for data analysis in MS scan data and then auto... Show Detail
- No：7882
- Date of Issue：2022/01/24 15:11
- Category： Software
(LCMS) Checking the System Configuration and Acquisition ...

The system configuration and the acquisition conditions during data acquisition are stored in a data file, and the system configuration can be checked using ... Show Detail
- No：7878
- Date of Issue：2022/01/24 14:17
- Category： Software
(LCMS) Displaying MS Spectra with Background Noise Removed

To display an MS spectrum of chromatogram peaks, either click the [Chromatogram View]-[Peak] button or double-click on the chromatogram. MS spectra shown her... Show Detail
- No：7876
- Date of Issue：2022/01/24 14:17
- Category： Software

21-30 of Total 133

To Top of Page

This site uses the FAQ system "PKSHA FAQ", which is a product of PKSHA Communication Inc.