FAQ - Frequently Asked Questions
- Products Search > HPLC > System Controller
Keyword Search
Frequently Referenced FAQ
FAQ within [ System Controller ]
-
Initial IP address, Log in ID, Pass word (HPLC)
· Instruments [CALIBRATION] menu PW: 00000 · CBM-20(lite)/40(lite), SCL-40 IP address: 192.168.200.99 Sub-net mask: 255.255.255.0 Web contro... Show Detail
- No:4395
- Date of Issue:2020/11/11 10:50
-
«Main Cause» The backup parameters of the controller are corrupted. The method file and sequence file were initialized. «Countermeasure» Set the method and... Show Detail
- No:3496
- Date of Issue:2020/12/02 16:10
-
«Main Cause» The method and sequence are returned to the same condition as when the instrument was last started because the backup parameters are corrupted. ... Show Detail
- No:3497
- Date of Issue:2020/12/02 16:10
-
«Main Cause» Instrument information (system name, group name) was initialized because an error was found in the backup parameters. «Countermeasure» Set the... Show Detail
- No:3498
- Date of Issue:2020/12/02 16:10
-
«Main Cause» An error signal was received from the external device connected to the external input terminal. «Countermeasure» Check in accordance with the h... Show Detail
- No:3499
- Date of Issue:2020/12/02 16:10
-
«Main Cause» Communication is no longer possible with the external detector connected to the optical cable connector on the instrument. «Countermeasure» Che... Show Detail
- No:3500
- Date of Issue:2020/12/02 16:10
-
«Main Cause» Acquisition was started when a detector that differs from the detector set in the simple parameters of the acquisition main screen was connected... Show Detail
- No:3501
- Date of Issue:2020/12/02 16:10
-
«Main Cause» An undefined fatal error has occurred. «Countermeasure» Check whether an error is displayed on the external detector, and follow the steps in... Show Detail
- No:3502
- Date of Issue:2020/12/02 16:10
-
«Main Cause» An undefined error (Level 1) has occurred on the external detector. «Countermeasure» Check whether an error is displayed on the external detect... Show Detail
- No:3503
- Date of Issue:2020/12/02 16:10
-
«Main Cause» An undefined error (Level 2) has occurred on the external detector. «Countermeasure» Check whether an error is displayed on the external detect... Show Detail
- No:3504
- Date of Issue:2020/12/02 16:10
1-10 of Total 150