FAQ - Frequently Asked Questions

  • Font Size
  • S
  • M
  • L

Keyword Search

You can search two or more words separated by a space. 
Separate keywords with sapce to search for ALL.
Separate with "｜" to search for EITHER words.
And having "-" at the start of the word will EXCLUDE it.

Frequently Referenced FAQ

Latest FAQ

FAQ within [ System Controller ]

141-150 of Total 150

≪ 15 / 15page ≫

  • Error Code:[0x9022]

    «Main Cause» An undefined error (Level 2) has occurred on the external detector. «Countermeasure» Check whether an error is displayed on the external detect... Show Detail

    • No：3504
    • Date of Issue：2020/12/02 16:10

  • Error Code:[0x9021]

    «Main Cause» An undefined error (Level 1) has occurred on the external detector. «Countermeasure» Check whether an error is displayed on the external detect... Show Detail

    • No：3503
    • Date of Issue：2020/12/02 16:10

  • Error Code:[0x9020]

    «Main Cause» An undefined fatal error has occurred. «Countermeasure» Check whether an error is displayed on the external detector, and follow the steps in... Show Detail

    • No：3502
    • Date of Issue：2020/12/02 16:10

  • Error Code:[0x9071]

    «Main Cause» Acquisition was started when a detector that differs from the detector set in the simple parameters of the acquisition main screen was connected... Show Detail

    • No：3501
    • Date of Issue：2020/12/02 16:10

  • Error Code:[0x9010]

    «Main Cause» Communication is no longer possible with the external detector connected to the optical cable connector on the instrument. «Countermeasure» Che... Show Detail

    • No：3500
    • Date of Issue：2020/12/02 16:10

  • Error Code:[0x9070]

    «Main Cause» An error signal was received from the external device connected to the external input terminal. «Countermeasure» Check in accordance with the h... Show Detail

    • No：3499
    • Date of Issue：2020/12/02 16:10

  • Error Code:[0x9006]

    «Main Cause» Instrument information (system name, group name) was initialized because an error was found in the backup parameters. «Countermeasure» Set the... Show Detail

    • No：3498
    • Date of Issue：2020/12/02 16:10

  • Error Code:[0x9004]

    «Main Cause» The method and sequence are returned to the same condition as when the instrument was last started because the backup parameters are corrupted. ... Show Detail

    • No：3497
    • Date of Issue：2020/12/02 16:10

  • Error Code:[0x9003]

    «Main Cause» The backup parameters of the controller are corrupted. The method file and sequence file were initialized. «Countermeasure» Set the method and... Show Detail

    • No：3496
    • Date of Issue：2020/12/02 16:10

  • Initial IP address, Log in ID, Pass word (HPLC)

    · Instruments [CALIBRATION] menu PW: 00000 · CBM-20(lite)/40(lite), SCL-40 IP address: 192.168.200.99 Sub-net mask: 255.255.255.0 Web contro... Show Detail

    • No：4395
    • Date of Issue：2020/11/11 10:50

141-150 of Total 150

To Top of Page

This site uses the FAQ system "PKSHA FAQ", which is a product of PKSHA Communication Inc.