• Font Size
  • S
  • M
  • L

FAQ within [ Autosampler ]

71-80 of Total 297

8 / 30page
  • Error Code:[0x8529] SYSTEM ERROR xxx

    «Main Cause» There is an error in the Autosampler's internal circuits. «Countermeasure» Turn the power OFF and contact a Shimadzu sales or service represen... Show Detail

    • No:3583
    • Date of Issue:2020/12/02 16:30
  • Error Code:[0x8530] CBM-20A ERROR

    «Main Cause» The injection volume exceeds the set value for the maximum volume of injection. «Countermeasure» Reduce the injection volume to a value less th... Show Detail

    • No:3584
    • Date of Issue:2020/12/02 16:30
  • Error Code:[0x8533] ERR COOLER

    «Main Cause» There is an error in the sample cooler's cooling unit. «Countermeasure» Turn power OFF and contact a Shimadzu sales or service representative. Show Detail

    • No:3585
    • Date of Issue:2020/12/02 16:30
  • Error Code:[0x8534] ERR TEMP SENS DH

    «Main Cause» Peltier dehumidifier temperature sensor error. «Countermeasure» Turn power OFF and contact a Shimadzu sales or service representative. Show Detail

    • No:3586
    • Date of Issue:2020/12/02 16:30
  • Error Code:[0x8535] ERR TEMP SENS RM

    «Main Cause» (1) The room temperature sensor detects an abnormally high or low temperature. (2) Room temperature sensor error. «Countermeasure» (1) If the r... Show Detail

    • No:3587
    • Date of Issue:2020/12/02 16:30
  • Error Code:[0x8537] ERR TEMP SENS L

    «Main Cause» Sample cooler L temperature sensor error. «Countermeasure» Turn off the power and contact a Shimadzu sales or service representative. Show Detail

    • No:3588
    • Date of Issue:2020/12/02 16:30
  • Error Code:[0x8538] ERR TEMP SENS M

    «Main Cause» Sample cooler M temperature sensor error. «Countermeasure» Turn off the power and contact a Shimadzu sales or service representative. Show Detail

    • No:3589
    • Date of Issue:2020/12/02 16:30
  • Error Code:[0x8539] ERR TEMP SENS R

    «Main Cause» Sample cooler R temperature sensor error. «Countermeasure» Turn off the power and contact a Shimadzu sales or service representative. Show Detail

    • No:3590
    • Date of Issue:2020/12/02 16:30
  • Error Code:[0x8540] NOT ADJUST RACK

    «Main Cause» Analysis is started on the sample rack of which rack position has not been adjusted. «Countermeasure» Adjust the rack position. Show Detail

    • No:3591
    • Date of Issue:2020/12/02 16:30
  • Error Code:[0x8541] NOT ADJUSTED-L

    «Main Cause» A sample rack of which rack position has not been adjusted is inserted in rack plate L. «Countermeasure» Adjust the rack position. Show Detail

    • No:3592
    • Date of Issue:2020/12/02 16:30

71-80 of Total 297

This site uses the FAQ system "PKSHA FAQ", which is a product of PKSHA Communication Inc.