FAQ - Frequently Asked Questions

  • Font Size
  • S
  • M
  • L

Keyword Search

You can search two or more words separated by a space. 
Separate keywords with sapce to search for ALL.
Separate with "｜" to search for EITHER words.
And having "-" at the start of the word will EXCLUDE it.

Frequently Referenced FAQ

Latest FAQ

FAQ within [ inspeXio SMX-225CT ]

1-10 of Total 21

≪ 1 / 3page ≫

  • (SMX-225CT) In Case of Emergency

    WARNING: In the event of a malfunction or other problem, such as if an unusual odoror smoke is observed, immediately shut off power supply to the system bysw... Show Detail

    • No：8660
    • Date of Issue：2022/05/18 10:52

  • (SMX-225CT) Starting the Software

    1. Checking for Samples on the Stage The CT stage is initialized during CT software inspeXio64 startup. CT stage initialization consists of moving the ... Show Detail

    • No：8663
    • Date of Issue：2022/05/19 10:22

  • (SMX-225CT) Supplying Power to the System

    CAUTION: If operating the system intermittently (without a long period of disuse), startup the system beginning with "Supplying Power Inside the System". I... Show Detail

    • No：8662
    • Date of Issue：2022/05/19 10:32

  • (SMX-225CT) Shutting Down the System

    CAUTION:If the system will be operated intermittently (without long periods of disuse),shut down the system according to the procedure described up to "Shutt... Show Detail

    • No：8664
    • Date of Issue：2022/05/19 10:43

  • (SMX-225CT) Restoring the System After an Error Shutdown

    1. Close the CT software. (If the software cannot be closed, go to Step 2.) 2. Turn the [OPERATE] key switch counterclockwise to the [OFF] position. ... Show Detail

    • No：8661
    • Date of Issue：2022/05/19 10:44
    • Brached FAQ

  • (SMX-225CT) Startup Inspections

    1. Inspect the lead glass for any scratches or cracks. If nothing unusual isdiscovered, click the [Next] button. WARNING:If the lead glass is scratc... Show Detail

    • No：8665
    • Date of Issue：2022/05/19 11:18

  • (SMX-225CT) Aging the X-ray generator

    The CT software inspeXio64 determines the tube voltage output permitted based on thelast time the previous aging process was finished and the specified volta... Show Detail

    • No：8666
    • Date of Issue：2022/05/19 11:39

  • (SMX-225CT) Status on the X-ray Panel Unit

    The three-digit status display on the X-ray panel unit can display a blinking code, whichindicates an error state, in addition to the solidly indicated 000 a... Show Detail

    • No：8674
    • Date of Issue：2022/05/19 16:22

  • (SMX-225CT) Replacing the Filament

    1. Click thebutton on the X-ray control area to display the [X-Ray MaintenanceSchedule] window. 2. Click the [Reset] button in [Usage time after ... Show Detail

    • No：8677
    • Date of Issue：2022/05/20 14:00
    • Last Updated：2022/05/26 14:25
    • Brached FAQ

  • (SMX-225CT) Cleaning the X-ray Tube Vacuum Chamber (Video)

    Clean the surface of the focus cup and the inside of the X-ray tube vacuum chamber. Perform this procedure when the filament is replaced or when aging does ... Show Detail

    • No：8678
    • Date of Issue：2022/05/23 09:04
    • Last Updated：2022/05/26 14:23

1-10 of Total 21

To Top of Page

This site uses the FAQ system "PKSHA FAQ", which is a product of PKSHA Communication Inc.