Flat panel detector calibration is a function for reducing unevenness and noise in theimage. Perform calibration if une

Use the provided "grid mesh phantom" (part No. 362-84302) when checking thecross-section image. 1. Click [Change

When X-ray output is difficult, the interior of the vacuum chamber may be dirty causingelectrical discharges. In this ca

NOTE: • Use this function in administrator mode. Click here for "(SMX-6010) Switching to Administrator Mode".

The pre-operation check/initialization involves checking the front door, checking the X-raygenerator, and returning the

Opening to the atmosphere is the operation in which the interior of the X-ray generatorthat is a vacuum is filled with a

Cause1:Is the key switch ON? Action1: Turn the key switch ON. Cause2:Is the OPERATE button ON? Action2: T

Cause1:Is the key switch ON? Action1: Turn the key switch ON. Cause2:Is origin point returncompleted? Action2

Cause1: Are X-rays being irradiated? Action1: Irradiate X-rays. Cause2:The X-ray image can becompletely black

Cause: Unevenness and noise influoroscopic images may becaused by deterioration of theflat panel detector over time.

FAQ - Frequently Asked Questions

Font Size
S
M
L

Products Search > Non-Destructive Testing (NDT) Systems > Xslicer SMX-6010

Keyword Search

Frequently Referenced FAQ

Latest FAQ

FAQ within [ Xslicer SMX-6010 ]

11-20 of Total 26

≪ 2 / 3page ≫

(SMX-6010) Performing Flat Panel Detector Calibration

Flat panel detector calibration is a function for reducing unevenness and noise in theimage. Perform calibration if unevenness or noise in the image becomes... Show Detail
- No：8603
- Date of Issue：2022/04/28 10:30
(SMX-6010) Checking the Cross-section Image and CT Calibr...

Use the provided "grid mesh phantom" (part No. 362-84302) when checking thecross-section image. 1. Click [Change Sample]. 2. Set the grid mesh... Show Detail
- No：8604
- Date of Issue：2022/04/28 13:16
- Brached FAQ
(SMX-6010) Cleaning the Vacuum Chamber

When X-ray output is difficult, the interior of the vacuum chamber may be dirty causingelectrical discharges. In this case, clean the interior of the vacuum ... Show Detail
- No：8605
- Date of Issue：2022/04/28 13:28
(SMX-6010) Replacing the Filament

NOTE: • Use this function in administrator mode. Click here for "(SMX-6010) Switching to Administrator Mode". • Even when [Status] under [Fila... Show Detail
- No：8595
- Date of Issue：2022/04/28 13:30
- Brached FAQ
(SMX-6010) Performing the Pre-Operation Check/Initialization

The pre-operation check/initialization involves checking the front door, checking the X-raygenerator, and returning the stage to the origin point. Perform th... Show Detail
- No：8591
- Date of Issue：2022/04/28 13:34
(SMX-6010) Opening to the Atmosphere

Opening to the atmosphere is the operation in which the interior of the X-ray generatorthat is a vacuum is filled with air. This operation is required when p... Show Detail
- No：8596
- Date of Issue：2022/04/28 13:36
(SMX-6010) The chamber light fails to come on

Cause1:Is the key switch ON? Action1: Turn the key switch ON. Cause2:Is the OPERATE button ON? Action2: Turn the OPERATE button ON. C... Show Detail
- No：8606
- Date of Issue：2022/04/28 13:55
(SMX-6010) The stage does not move

Cause1:Is the key switch ON? Action1: Turn the key switch ON. Cause2:Is origin point returncompleted? Action2:Restart the control softwareand comp... Show Detail
- No：8607
- Date of Issue：2022/04/28 14:01
(SMX-6010) The X-ray image is completely black

Cause1: Are X-rays being irradiated? Action1: Irradiate X-rays. Cause2:The X-ray image can becompletely black if X-rayoutput is too low. Action2: ... Show Detail
- No：8608
- Date of Issue：2022/04/28 14:03
(SMX-6010) There is unevenness or noise in X-ray images

Cause: Unevenness and noise influoroscopic images may becaused by deterioration of theflat panel detector over time. Action:Calibrate the flat paneldetect... Show Detail
- No：8609
- Date of Issue：2022/04/28 14:05

11-20 of Total 26

To Top of Page

This site uses the FAQ system "PKSHA FAQ", which is a product of PKSHA Communication Inc.